LL-T1520 (serv.man2). Chapter 1 - Outline of the product, nomenclature and function. - Sharp Monitor Service Manual (repair manual)

ll-t1520 (serv.man2) service manual
Model
LL-T1520 (serv.man2)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
105.16 KB
Type
PDF
Document
Service Manual
Brand
Device
Monitor / Chapter 1 - Outline of the product, nomenclature and function.
File
ll-t1520-sm2.pdf
Date

Read Sharp LL-T1520 (serv.man2) Service Manual online

PC-UM10M
LL-T1520-H/B LL-T1620-H/B   OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■ 
■ 
■ 
■ 
DIMENSIONS (Units: mm)
Cable
Analog signal cable: Approx. 2.0m
Audio cable:
Approx. 2.0m
Digital signal cable, NL-C01E (purchased separately): Approx. 2.0m
Analog signal cable, NL-C02E (purchased separately): Approx. 2.0m
LL-T1520
LL-T1620
LCD panel
Diagonal 38cm
Diagonal 40cm
Advanced Super-V and Anti-GlareLow Reflection TFT LCD module
Resolution (max.)
XGA, 1,024 x 768 pixel
SXGA, 1,280 x 1,024 pixel
Displayable colors (max.)
Approx. 16.77 million color (8 bit)
Brightness (max.)
250 cd/m
2
300 cd/m
2
Dot pitch
0.297(H) x 0.297 (V)mm
0.248(H) x 0.248 (V)mm
Contrast ratio
400 : 1
Angle of visibility
Left-right 170°; Up-down 170°
Screen display size
Horizontal 304.1 x Vertical 228.1 mm
Horizontal 317.4 x Vertical 253.9 mm
Video signal
Analog: Analog RGB (0.7 Vp-p) [75
]
Digital: DVI standard 1.0 compatible
Sync signal
H/V separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL level:+/-)
Expansion compensation
Digital screening
(Enlargement VGA/SVGA etc. to full screen size. )
Digital screening
(Enlargement VGA/SVGA/XGA etc. to full screen size. )
Plug & Play
VESA DDC1/DDC2B compatible
Power management
VESA DPMS, DVI DMPM
Speaker output
1W + 1W
Input signal terminal
Mini D-sub 15 pin (3 row), DVI-I 29 pin
Audio input terminal
Mini stereo jack
Headphone terminal
Mini stereo jack
Screen tilt
Upward approx.0° -30°; downward approx.0° - 5°
Screen swivel
Approx.90° from left through right
Power supply
AC100 - 240V, 50/60Hz
Temperature of 
operating environment
5 - 35°C
Power consumption
Maximum 36W (Standby state: 3W)
Maximum 42W (Standby state: 3W)
Dimensions
337(W) x 185(D) x 355(H) mm
352(W) x 185(D) x 370(H) mm
Weight
Approx. 4.9kg
(approx. 3.3kg excluding stand)
Approx. 5.3kg
(approx. 3.7kg excluding stand)
352
185
370
298
238
64
LL-T1620
337
185
355
270
238
61
LL-T1520
PC-UM10M
LL-T1520-H/B LL-T1620-H/B   OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 2
Relevant signal timings
• Recommended resolution for LL-T1520 is 1024 x 768. 
• Recommended resolution for LL-T1620 is 1280 x 1024. 
• All are compliant only with non-interlaced. 
• The monitor can be connected to the following computers that have a
DVI standard output terminal  (DVI-D24 pin or DVI-I29 pin) for digital
connection. (Note that the display may not appear correctly, depend-
ing on the connected computer.)
-- LL-T1520: Computers capable of XGA output
-- LL-T1620: Computers capable of SXGA output
• Frequencies for Power Macintosh and the Sun Ultra series are refer-
ence values. To connect, another adapter (commercially available)
may be required. 
• If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear. Follow your computer's instruction manual
to set the timing so that it is compatible with the monitor.
• If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
The analog RGB input connector pin
Display mode
Hsync
Vsync
Dot frequency
LL-T1520
LL-T1620
ANALOG
DIGITAL
ANALOG
DIGITAL
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
|
|
|
|
37.9kHz
72Hz
31.5MHz
|
|
|
|
37.5kHz
75Hz
31.5MHz
|
|
|
|
800 x 600
35.1kHz
56Hz
36.0MHz
|
-
|
-
37.9kHz
60Hz
40.0MHz
|
|
|
|
48.1kHz
72Hz
50.0MHz
|
|
|
|
46.9kHz
75Hz
49.5MHz
|
|
|
|
1024 x 768
48.4kHz
60Hz
65.0MHz
|
|
|
|
56.5kHz
70Hz
75.0MHz
|
|
|
|
60.0kHz
75Hz
78.75MHz
|
|
|
|
1152 x 864
67.5kHz
75Hz
108.0MHz
-
-
|
|
1280 x 960
60.0kHz
60Hz
108.0MHz
-
-
|
|
1280 x 1024
64.0kHz
60Hz
108.0MHz
-
-
|
|
80.0kHz
75Hz
135.0MHz
-
-
|
-
US text
720 x 400
31.5kHz
70Hz
28.3MHz
|
|
|
|
Power 
Macintosh 
series
640 x 480
35.0kHz
66.7Hz
30.2MHz
|
-
|
-
832 x 624
49.7kHz
74.6Hz
57.3MHz
|
-
|
-
1024 x 768
60.2kHz
75Hz
80.0MHz
|
-
|
-
1152 x 870
68.7kHz
75Hz
100.0MHz
-
-
|
-
1280 x 1024
64.0kHz
60Hz
108.0MHz
-
-
|
-
80.0kHz
75Hz
135.0MHz
-
-
|
-
Sun Ultra 
series
1024 x 768
48.3kHz
60Hz
64.13MHz
-
-
|
-
53.6kHz
66Hz
70.4MHz
-
-
|
-
56.6kHz
70Hz
74.25MHz
-
-
|
-
1152 x 900
61.8kHz
66Hz
94.88MHz
-
-
|
-
1280 x 1024
71.7kHz
67.2Hz
117.01MHz
-
-
|
-
No.
Function
No.
Function
1
Red video signal input
9
DDC/+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
GND
12
DDC data
5
GND
13
For Hsync signal input
6
For red video signal GND
14
For Vsync signal input
7
For green video signal GND
15
DDC clock
8
For blue video signal GND
(Mini D-sub connector with 15 pins)
PC-UM10M
LL-T1520-H/B LL-T1620-H/B   OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 3
The DVI-I input connector pin
Power management
The monitor is based on the VESA DPMS*
1
 and the DVI DMPM*
2
 stan-
dards.
To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard and
the DVI DMPM standard.
*1  DPMS: Display Power Management Signalling
*2  DMPM: Digital Monitor Power Management
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play mon-
itor.
There are many varieties of DDC due to the differences between sys-
tems. This monitor works with DDC1 and DDC2B.
PRODUCT DESCRIPTION
Adjusting the tilt and the swivel of monitor
Lightly holding both sides of the monitor, adjust it to a suitable viewing
angle.
Note: When adjusting the screen tilt and swivel, pressure from hands
on the LCD panel could cause damage. 
No.
Function
No.
Function
1
TMDS data 2-
16
Hot plug detection
2
TMDS data 2+
17
TMDS data 0-
3
TMDS data 2/4 shield
18
TMDS data 0+
4
N.C.
19
TMDS data 0/5 shield
5
N.C.
20
N.C.
6
DDC clock
21
N.C.
7
DDC data
22
TMDS clock shield
8
Analogue vertically 
synchronised signal
23
TMDS clock +
9
TMDS data 1-
24
TMDS clock -
10
TMDS data 1+
C1
Analogue red image signal
11
TMDS data 1/3 shield
C2
Analogue green image signal
12
N.C.
C3
Analogue blue image signal
13
N.C.
C4
Analogue horizontally synchro-
nised signal
14
+5V
C5
Analogue GND
15
GND
DPMS mode
Screen
Power
consumption
H-sync
V-sync
ON
Display on
LL-T1520: 36W
LL-T1620: 42W
Yes
Yes
STANDBY
Display off
LL-T1520: 3W
LL-T1620: 3W
No
Yes
SUSPEND
Yes
No
OFF
No
No
DPMS mode
Screen
Power consumption
ON
Display on
LL-T1520: 36W
LL-T1620: 42W
OFF
Display off
LL-T1520: 3W
LL-T1620: 3W
C1 C2
C3 C4
C5
(DVI-I connector with 29 pins)
1. INPUT button:
To switch between the signal’s input terminals.
(Analogue RGB input terminal 
i
  DVI-I input termi-
nal)
2. MENU button:
This button is used to pop-up, select and close the
OSD (On Screen Display) Menu.
3. SELECT button: This button is used to select menu options when
the OSD Menu is displayed.
4. 
e d
 buttons:
When the OSD Menu is displayed:
These buttons are used to increase or decrease
the value of a selected option. 
When the OSD Menu is not displayed:
These buttons are used to adjust backlight bright-
ness and speaker volume.
5. Power button
6. Power LED:
This LED is lit green when in use and orange when
in power-saving mode.
7. Speakers
Audio entering via the monitor and the external
device connected to the monitor can be heard.
approx.30˚
approx.45˚
approx.5˚
approx.45˚
PC-UM10M
LL-T1520-H/B LL-T1620-H/B   OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 4
.
8. DVI-I input terminal:
The computer’s digital RGB output terminal or analogue RGB
output terminal can be connected here.
• The monitor can be connected to the following computers
that have a DVI standard output terminal (DVI-D24 pin or
DVI-I29 pin) for digital connection. (Note that the display may
not appear correctly, depending on the connected com-
puter.)
-- LL-T1520: Computers capable of XGA output
-- LL-T1620: Computers capable of SXGA output
• Separately sold cables are necessary for connection.
To connect to a digital RGB output terminal: 
-- Digital signal cable (model name: NL-C01E)
To connect to an analog RGB output terminal: 
-- Analog signal cable (model name: NL-C02E)
9. Analog RGB input
terminal:
The analog signal cable is connected here.The analog signal
cable included should be used.
10. Audio input terminal:
A computer's audio output terminal can be connected here. 
The audio cable included should be used.
11. Security lock anchor:
By connecting a security lock (commercially available) to the
security lock anchor, the monitor is fixed so that it cannot be
transported.
The security slot works in conjunction with Kensington Micro
Saver Security Systems.
12. Power terminal:
13. Headphone terminal:
Headphones (commercially available) can be connected here.
14. Main power switch
15. Ventilation openings:
Note: Never block the ventilation openings as this may lead to
overheating inside the monitor and result in malfunction.
Page of 4
Display

Download Sharp LL-T1520 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sharp LL-T1520 (serv.man2) Service Manual in PDF. LL-T1520 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LL-T1520 (serv.man2) Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.