LL-T1512 (serv.man8) - Sharp Monitor User Guide / Operation Manual. Page 25

Adjustments can be made using the On Screen
Display (OSD) Menu provided.

On Screen Display for adjustment
If you are using Windows, open the Test Pattern on
the accompanying Utility Disk. (p. 21).
If your system is not Windows, you can not use the
Test Pattern. Therefore display an image that makes
the entire screen light and adjust it through checking
visually its actual tone.

How to adjust
1. Press the MENU button.

The WHITE BALANCE Menu will be displayed.

At this point relevant menu options can be
adjusted.
Each time the MENU button is pressed the next
menu is selected. (WHITE BALANCE 

→ MODE

SELECT 

→ OSD Menu disappears)

The OSD Menu automatically disappears
approximately 30 seconds after the last
command.

On settings other than [STD] not all graduations
can be displayed. To display all graduations, set
to [STD].

Use the     buttons to select [COOL], [·], [STD],
[·], [WARM] or [USER].

Selecting USER will display the setting values for
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine
adjustments.

Use the SELECT button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].

To go to the next menu:MENU button

COOL . . .  Color tone bluer than STD
   • . . . . . .  Color tone slightly bluer than STD
STD . . . . .  Color tone standard setting
   • . . . . . .  Color tone slightly reddish than STD
WARM . . .  Color tone reddish than STD

USER
R-CONTRAST . . .    button for blue-green

  button for red

G-CONTRAST . .    button for purple

  button for green

B-CONTRAST . . .    button for yellow

  button for blue