Read Sharp LL-T1501A (serv.man13) Service Manual online
■
Rear View
■
Side view
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
1. CONNECTION
1-1. Connecting the monitor to a computer
(PC etc.)
When connecting, ensure that both the monitor and computer are
switched off.
switched off.
1-2. Connecting the monitor to a power source
Before connecting, first turn off the monitor’s main power switch.
1-3. Connecting a USB device
If your computer or computer’s OS is USB compatible, the monitor
can be connected to a USB device.
can be connected to a USB device.
1. Plug one end of the USB cable (provided) into the monitor’s USB
upstream port.
2. Connect the other end of the USB cable into the computer or the
USB downstream port.
USB port: Upstream (1 Port)
A USB-ready computer or
self-powered USB hub can
be connected here.
A USB-ready computer or
self-powered USB hub can
be connected here.
Security lock anchor
By connecting a security lock (purchased separately) to the
security lock anchor, the monitor is fixed so that it cannot
be transported.
By connecting a security lock (purchased separately) to the
security lock anchor, the monitor is fixed so that it cannot
be transported.
The theft prevention hole works in conjunction with
Kensington Micro Saver Security Systems.
Kensington Micro Saver Security Systems.
RGB signal cable
This is to be connected to the
computer's analog RGB output
terminal.
This is to be connected to the
computer's analog RGB output
terminal.
Power connector
The power cord is
connected here.
The power cord is
connected here.
Ventilation
openings
openings
Note: Never block the ventilation
openings as this may lead to
overheating inside the monitor
and result in malfunction
openings as this may lead to
overheating inside the monitor
and result in malfunction
Main power switch
( I ) Turns the monitor on.
(O) Turns the monitor off.
( I ) Turns the monitor on.
(O) Turns the monitor off.
USB port: Downstream (2 ports)
A USB device can be connected
here.
A USB device can be connected
here.
Firmly insert the analog RGB output terminal
(mini D-sub 15 pin with 3 rows) then tighten the
screws each side.
(mini D-sub 15 pin with 3 rows) then tighten the
screws each side.
RGB cable
If connecting to a D-sub 15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(to be purchased separately) to the RGB signal
cable.
Macintosh, attach a Macintosh conversion adapter
(to be purchased separately) to the RGB signal
cable.
Macintosh conversion adapter
RGB signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
After connecting the adapter, tighten the
screws on each side to fix into place.
1
2
AC outlet
Power cord
USB cable
(provided)
(provided)
USB upstream port
To the computer or another
USB hub’s downstream port
USB hub’s downstream port
