LL-S242A (serv.man4). (Setup Manual) - Sharp Monitor User Guide / Operation Manual. Page 5

ENGLISH

3

E

-  Do not use the monitor where there is a lot of dust, where 

humidity is high, or where the monitor may come into contact 

with oil or steam. Do not use in an environment where 

there are corrosive gases (sulfur dioxide, hydrogen sulfide, 

nitrogen dioxide, chlorine, ammonia, ozone, etc.). As this 

could lead to fire.

-  Ensure that the monitor does not come into contact with 

water or other fluids. Ensure that no objects such as paper 

clips or pins enter the monitor as this could lead to fire or 

electric shock.

-  Do not place the monitor on top of unstable objects or in 

unsafe places. Do not allow the monitor to receive strong 

shocks or to strongly vibrate. Causing the monitor to fall or 

topple over may damage it.

-  Continuous Operation Time and Warranty 

This product has been designed based on the assumption 

of 15 or fewer hours of usage in one day. Continuous usage 

that exceeds 15 hours in one day is not covered by the 

warranty.

-  Do not use the monitor near heating equipment or in places 

where there is likelihood of high temperature, as this may 

lead to generation of excessive heat and outbreak of fire.

-  Do not use the monitor in places where it may be exposed to 

direct sunlight.

-  The AC outlet shall be installed near the equipment and shall 

be easily accessible.

-  Do not use in applications where water or other fluid may 

adhere to the screen. If fluid adheres to the screen, the touch 

panel may not operate correctly.

-  Do not use your nails, touch pens or digitizer pens other 

than the one supplied, sharp pencils, or other hard objects to 

operate the unit.

-  If the pen tip of the digitizer pen is worn or damaged, replace 

the pen tip. Failure to do so may scratch the screen or cause 

the digitizer pen functions to not operate correctly.

-  Use only the power cord and AC adapter supplied with the 

monitor.

-  When handling the AC adapter, observe the following: 

Incorrect handling may result in fire, electric shock, or injury.
•  Do not drop the AC adapter or subject it to impact.
•  Never disassemble the AC adapter. It contains high voltage 

parts that are dangerous to touch.

•  The AC adapter is for indoor use only. Do not use it outside.
•  Do not use the supplied AC adapter with other devices.

-  Do not damage the power cord and AC adapter nor place 

heavy objects on it, stretch it or over bend it. Also, do not 

add extension cords. Damage to the cord may result in fire 

or electric shock.

-  Do not use the power cord with a power tap. 

Adding an extension cord may lead to fire as a result of 

overheating.

-  Do not remove or insert the power plug with wet hands. 

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
-  Do not attempt to repair the power cord if it is broken 

or malfunctioning. Refer the servicing to the service 

representative.

-  Do not stay in contact with the parts of the product and the 

AC adapter that become hot for long periods of time. 

Doing so may result in low-temperature burns.

-  For your health, observe the following:

•  If using the monitor continuously, take a 10- to 15-minute 

break every hour to rest your eyes.

•  Do not use the monitor in high-contrast light conditions.
•  Do not use the monitor in locations where the screen is 

subject to direct sunlight.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,

particularly to children, can be avoided by taking simple precautions such as:

• Using fixing devices like wall mount brackets recommended by the manufacturer.

• Only using furniture that can safely support the monitor.

• Ensuring the monitor is not overhanging the edge of the supporting furniture.

• Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the 

monitor to a suitable support.

• Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the monitor or its controls.