Read Sharp LL-S242A (serv.man4) User Guide / Operation Manual online
ENGLISH
11
E
Installation (Continued)
Turning Power On/Off
Turning on the power
1. Press the POWER button.
Press
POWER button
Power LED
The power LED turns on.
2. Turn on the PC.
The screen appears.
Status
Status of the monitor
Green lit
Signal input
Orange lit
No signal input
Alternately flashing red and
green
Abnormal temperature
Caution
• When switching the POWER button off and back on,
always wait for an interval of at least 5 seconds. Rapid
switching may lead to errors or malfunctions.
• High temperatures inside the unit are indicated when the
Power LED is alternately flashing red and green, and may
lead to the power turning off automatically.
• For a complete electrical disconnection, pull out the main
plug.
Turning off the power
1. Turn off the PC.
2. Depress the POWER button for around 2 seconds.
Depress for around
2 seconds
POWER button
The power LED turns off.
Caution
• If the monitor will not be used for a long time, disconnect
the power plug from the power outlet.
2. Place the monitor where you want to use it.
n
LL-S242A-W
Horizontal position
Place the monitor on a table or other level surface.
1. Simply lay the unit on the desired location.
n
Operation Mode
When the monitor is turned on for the first time after being shipped from the factory, the operation mode setting screen will be
displayed. Set it to Mode1 or Mode2.
Mode1......If there is no operation for 4 hours or more, the monitor automatically turns off the power.
Mode2......Will perform standard operation.
Even after being set, changes can be made using [Operation Mode], located in the menu of the monitor. (See OPERATION
MANUAL.)
Click on the first or last page to see other LL-S242A (serv.man4) service manuals if exist.