Read Sharp LL-S201A (serv.man3) Service Manual online
LL-S201A INSTALLATON / SETTINGS 2 - 3
1-2. CONNECTING PERIPHERAL EQUIPMENT
(Caution)
• Be sure to turn off the power and disconnect the plug from the
power outlet before connecting/disconnecting cables. Also, read
the manual of the equipment to be connected.
• Do not forcibly bend or apply force to cables. Doing so may
result in wire breakage or other damage.
• When connecting cables, spread a soft cloth on a stable level
surface such as a desk, and gently place the monitor on it with
the screen facing down.
• Do not use any cable that has a damaged or deformed terminal.
Using such cables may cause malfunctions.
(TIPS)
• Images may not be displayed properly depending on the
computer (video card) to be connected.
■Connection with a PC
Connect the monitor and a PC using the connection cable.
[Inputting video and audio HDMI input terminal]
Check the orientation of the connector and insert it horizontally
as far as it will go.
It is possible to connect the monitor’s HDMI input terminal to a
smart phone or similar MHL-compliant device using a
commercially available MHL cable.
This production incorporates MHL 1.
[DisplayPort input terminal]
Check the orientation of the connector and insert it horizontally
as far as it will go.
(TIPS)
• The length of the signal cables or surrounding environment may
affect the image quality.
• The video from the terminal that has signal input is displayed. In
this state, even if a signal is input from the other terminal, the
display is not switched. To switch the display, use [Input
Selection] on the menu screen.
• If the LCD monitor is turned on when there are input signals
from both terminals, the video from the DisplayPort input
terminal is displayed.
[Using the touch panel]
To use the touch panel, connect the monitor to a USB port on a
PC using the supplied USB cable.
Check the orientation of the connector and insert it horizontally as
far as it will go.
■Connecting headphones
Headphones(commercially available) with a stereo mini plug（
φ
3.5mm）can be connected to the monitor.
(TIPS)
• When headphones are connected it will no longer be possible to
hear sound from the monitor’s speakers.
• Volume can be adjusted using [Volume] on the menu screen
• The volume is set to 0 when monitor is shipped from the factory.
Click on the first or last page to see other LL-S201A (serv.man3) service manuals if exist.