Read Sharp LL-P202V (serv.man2) Service Manual online
LL-P202V/S242A DISASSEMBLY AND ASSEMBLY 4 - 19
■LL-S242A
1) Remove the center angle.
2) Remove the five connectors on the Main PWB and remove the five screws (M3x6 SW+W).
3) Turn the Main PWB and disconnect the two connectors at the rear side of the Main PWB. Then, remove the Main PWB.
<Caution>
・
When the connectors are disconnected, be careful not to putting a load on the FPC by pulling it.
・
When the connector is connected, insert the connector firmly and fit the tabs with the channels of the connector.
Click on the first or last page to see other LL-P202V (serv.man2) service manuals if exist.