Read Sharp LL-H1813 Service Manual online
PC-UM10M
LL-H1813 CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
Digital RGB connection
Connect the digital signal cable (sold separately-model name:NL-C01E)
to the DVI-I input terminal of the monitor and digital RGB output termi-
to the DVI-I input terminal of the monitor and digital RGB output termi-
nal of the computer.
• For digital signal input, it can be connected to a computer with a DVI-
compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which
has SXGA output ability. (Depending on the computer to be con-
has SXGA output ability. (Depending on the computer to be con-
nected, correct display may or may not be possible.)
• Paying attention to connector direction, firmly insert the signal
cable to terminal, and then tighten the screws at both sides.
Set the monitor as follows when establishing a digital connection with a
Power Mac using an ADC-DVI adapter made by Belkin. (Operation has
been checked with the Power Mac G4 M7627J/A)
• Perform settings with the Power Mac power supply off.
1.
After connecting the power cord, turn on the monitor’s main power.
2.
Press the
e
button and
d
button simultaneously, and while doing
this press the POWER button (i.e. turn the power on).
3.
Set the input terminal to which the Belkin ADC-DVI adapter is con-
nected to ON.
Use the SELECT button to select [INPUT1] or [INPUT2], and use
the
the
e d
buttons to select [ON] and [OFF].
• Do not set to [ON] if you are not using a Belkin ADC-DVI adapter,
as this may result in incorrect display.
4.
Press the MENU button.
This completes setting.
CONNECTING THE MONITOR TO A POWER SOURCE
CONNECTING A USB DEVICE
This monitor is equipped with a USB standard (Rev. 1.1) self-powered
hub.
Downstream (2 ports)
Each of these ports enables connection of a USB device with working
current up to 500 mA.
Upstream (1 port)
This enables connection of a USB compatible computer or USB hub.
Notes: • If a USB cable is required, please use the one included.
• Before connecting, ensure that the shape of the USB cable
connector is correct.
• For information regarding the USB function (such as set-up)
please refer to the operation manual of the computer to be
connected.
• Some computers, OS and other devices may not be able to
be activated. To ascertain a certain device’s USB compatibil-
ity, please contact the manufacturer of the device.
Input terminal 1 and 2
You can connect to
either side.
You can connect to
either side.
Digital RGB output
terminal
terminal
Digital signal cable
Power terminal
AC outlet
Power cord
Upstream
USB cable
Downstream
Click on the first or last page to see other LL-H1813 service manuals if exist.