Read Sharp LL-H1513 Service Manual online
PC-UM10M
LL-H1513-E CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
When connecting to an analog RGB output terminal:
• Use an analog signal cable (model name: NL-C02E).
• Paying attention to connector direction, firmly insert the signal
cable to terminal, and then tighten the screws at both sides.
Set the monitor as follows when establishing a digital connection with a
Power Mac using an ADC-DVI adapter made by Belkin. (Operation has
been checked with the Power Mac G4 M7627J/A)
been checked with the Power Mac G4 M7627J/A)
• Perform settings with the Power Mac power supply off.
• The setup screen automatically disappears approximately 30 sec-
onds after the last command.
1.
After connecting the power cord, turn on the monitor’s main power.
2.
Press the
e
button and
d
button simultaneously, and while doing
this press the POWER button (i.e. turn the power on).
3.
Set to [ON] with the
e d
buttons.
• Do not set to [ON] if you are not using a Belkin ADC-DVI adapter, as
this may result in incorrect display.
4.
Press the MENU button.
This completes setting.
CONNECT THE ACCESSORY AUDIO CABLE
• If you plan to use a commercially available cable, obtain one with no
resistance.
CONNECTION OF HEADPHONES
(COMMERCIALLY AVAILABLE)
(COMMERCIALLY AVAILABLE)
Headphones (commercially available) can be connected.
CONNECTING THE MONITOR TO A POWER SOURCE
CONNECTING A USB DEVICE
This monitor is equipped with a USB standard (Rev. 1.1) self-powered
hub.
Downstream (2 ports)
Each of these ports enables connection of a USB device with working
current up to 500 mA.
Upstream (1 port)
This enables connection of a USB compatible computer or USB hub.
Notes: • If a USB cable is required, please use the one included.
• Before connecting, ensure that the shape of the USB cable
connector is correct.
• For information regarding the USB function (such as set-up)
please refer to the operation manual of the computer to be
connected.
• Some computers, OS and other devices may not be able to
be activated. To ascertain a certain device's USB compatibil-
ity, please contact the manufacturer of the device.
DVI-I input terminal
RGB output terminal
Display cable
(to be purchased separately)
(to be purchased separately)
MAC DIGITAL
INPUT-2
OK [ MENU ]
ON
OFF
Audio cable
Audio output terminal
Audio input
terminal
terminal
Headphones
Headphone
terminal
terminal
Power cord
AC outlet
Power terminal
Upstream
Downstream
USB cable
Click on the first or last page to see other LL-H1513 service manuals if exist.