Read Sharp LL-H1513 (serv.man11) Service Manual online
PC-UM10M
LL-H1513-E OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 2
Relevant signal timings
• Recommended resolution is 1024 x 768.
• All are compliant only with non-interlaced.
• For a digital signal input, it can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has XGA output ability. (Depending on the computer to be con-
which has XGA output ability. (Depending on the computer to be con-
nected, correct display may or may not be possible.)
• Frequencies for Power Macintosh and the Sun Ultra series are refer-
ence values. To connect, another adapter (purchased separately)
may be required.
may be required.
• If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear. Follow your computer’s instruction manual
to set the timing so that it is compatible with the monitor.
• If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
The analog RGB input connector pin
The DVI-I input connector pin
Power management
The monitor is based on the VESA DPMS*
1
and the DVI DMPM*
2
stan-
dards.
To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard and
the DVI DMPM standard.
the DVI DMPM standard.
*1 DPMS: Display Power Management Signalling
*
Not using USB hub
*2 DMPM: Digital Monitor Power Management
*
Not using USB hub
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play mon-
DDC compliant and if it is set so that it can detect the Plug & Play mon-
itor.
There are many varieties of DDC due to the differences between sys-
tems. This monitor works with DDC1 and DDC2B.
tems. This monitor works with DDC1 and DDC2B.
Display mode
Hsync
Vsync
Dot
frequency
ANA-
LOG
DIGI-
TAL
VESA
640
u
480
31.5kHz
60Hz
25.175MHz
|
|
37.9kHz
72Hz
31.5MHz
|
|
37.5kHz
75Hz
31.5MHz
|
|
800
u
600
35.1kHz
56Hz
36.0MHz
|
-
ˆ
•
37.9kHz
60Hz
40.0MHz
|
|
48.1kHz
72Hz
50.0MHz
|
|
46.9kHz
75Hz
49.5MHz
|
|
1024
u
768
48.4kHz
60Hz
65.0MHz
|
|
56.5kHz
70Hz
75.0MHz
|
|
60.0kHz
75Hz
78.75MHz
|
|
US text
720
u
400
31.5kHz
70Hz
28.3MHz
|
|
Power
Macintosh
series
Macintosh
series
640
u
480
35.0kHz
66.7Hz
30.2MHz
|
-
832
u
624
49.7kHz
74.6Hz
57.3MHz
|
-
1024
u
768
60.2kHz
75Hz
80.0MHz
|
-
No.
Function
No.
Function
1
Red video signal input
9
DDC/+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
GND
12
DDC data
5
GND
13
For Hsync signal input
6
For red video signal GND
14
For Vsync signal input
7
For green video signal GND
15
DDC clock
8
For blue video signal GND
(Mini D-sub connector with 15 pins)
No.
Function
No.
Function
1
TMDS data 2-
16
Hot plug detection
2
TMDS data 2+
17
TMDS data 0-
3
TMDS data 2/4 shield
18
TMDS data 0+
4
N.C.
19
TMDS data 0/5 shield
5
N.C.
20
N.C.
6
DDC clock
21
N.C.
7
DDC data
22
TMDS clock shield
8
Analogue vertically
synchronised signal
synchronised signal
23
TMDS clock +
9
TMDS data 1-
24
TMDS clock -
10
TMDS data 1+
C1
Analogue red image signal
11
TMDS data 1/3 shield
C2
Analogue green image sig-
nal
nal
12
N.C.
C3
Analogue blue image sig-
nal
nal
13
N.C.
C4
Analogue horizontally syn-
chronised signal
chronised signal
14
+5V
C5
Analogue GND
15
GND
DPMS mode
Screen
Power
consumption
H-sync
V-sync
ON
Display on
33W*
Yes
Yes
STANDBY
Display off
3W
No
Yes
SUSPEND
Yes
No
OFF
No
No
DPMS mode
Screen
Power consumption
ON
Display on
33W*
OFF
Display off
3W
C1 C2
C3 C4
C5
(DVI-I connector with 29 pins)
Click on the first or last page to see other LL-H1513 (serv.man11) service manuals if exist.