LL-191A (serv.man3) - Sharp Monitor User Guide / Operation Manual. Page 25

(Mini D-sub connector with 15 pins)

- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun

Ultra series are reference values. To connect,
another adapter (commercially available) may
be required.

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.

No.

Function

1

Red video signal input

2

Green video signal input

3

Blue video signal input

4

GND

5

GND

6

For red video signal GND

7

For green video signal GND

8

For blue video signal GND

9

+5V

10

GND

11

GND

12

DDC data

13

For Hsync signal input

14

For Vsync signal input

15

DDC clock

The monitor is based on VESA DPMS (Display
Power Management Signaling).
To activate the monitor's power management
function, both the video card and the computer
must conform to the VESA DPMS standard.

DPMS: Display Power Management Signalling

This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or computer. It
transfers information such as degree of resolution
between the monitor and computer. You can use
this function if your computer is DDC compliant
and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.

DPMS mode

Screen

Power

H-sync V-sync

consumption

ON

Display on

Yes

Yes

STANDBY

No

Yes

SUSPEND

Display off

Yes

No

OFF

No

No

36 W

1.8 W

191A_gb.P65

12/15/2003, 5:27 PM

25