Read Sharp LL-171ME (serv.man3) Service Manual online
LL-171ME
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1-1. Connecting the monitor to a computer
Caution • When connecting, ensure that the monitor and all the equip-
ment you are connecting to it are switched off.
• Be careful not to over bend the cable or add extension cords
as this could lead to a malfunction.
• When using the monitor for the first time or after having
changed the system settings during use, perform an auto-
matic screen adjustment.
Note: • Depending on the computer or OS, you may have to install the
set-up information for the monitor.
• When connecting to a notebook and the notebook compute’s
screen is set so that it is displaying at the same time, the MS-
DOS screen may not be able to display properly. In this case,
change the settings so that only the monitor is displaying.
If connecting to a D-sub15 pin 2 row Apple Power Macintosh, attach a
Macintosh conversion adapter (commercially available) to the analog
Macintosh conversion adapter (commercially available) to the analog
signal cable.
1-2. Antenna connection
Caution: When connecting, ensure that the monitor is switched off.
To enjoy a clearer picture, we recommend that you use an outdoor
antenna.
Use a 75
Use a 75
Ω
coaxial cable with a DIN45325 (IEC169-2) plug to connect
the outdoor antenna to the antenna input terminal on the left side of the
monitor.
1-3. Connecting the monitor to av equipment
Caution: Ensure that the monitor and all the equipment you are con-
necting to it are switched off before you begin.
(1) AV equipment with 21-pin Euro-SCART (RGB) terminals
(2) AV equipment with video output terminals
Note: When you are using the video input terminal, do not connect the
cable to the S-video input terminal.
PC analog
signal cable
(accessory)
signal cable
(accessory)
PC audio cable
(accessory)
(accessory)
Audio output terminal
The monitor's speakers will play the
computer's audio when you connect
the two devices with the PC audio
cable accessory.
The monitor's speakers will play the
computer's audio when you connect
the two devices with the PC audio
cable accessory.
Analog RGB terminal
(Mini D-sub15 pin 3 rows)
Paying attention to the connector direction,
firmly insert the signal cable straight into the
connector, and then tighten the screws at
both ends.
(Mini D-sub15 pin 3 rows)
Paying attention to the connector direction,
firmly insert the signal cable straight into the
connector, and then tighten the screws at
both ends.
Macintosh conversion adapter
Power Macintosh
Antenna
input terminal
(ANT)
input terminal
(ANT)
75
Ω
coaxial cable (round cable)
(not supplied)
Left side of the monitor
Decoder etc.
AV-IN1
21-pin Euro-SCART cable
(commercially available)
(commercially available)
6
2
4
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
21
Left side of the monitor
VCR etc.
AV-IN2
(Yellow)
(Yellow)
(White)
(White)
(Red)
(Red)
RCA pin cable
(commercially available)
(commercially available)
Click on the first or last page to see other LL-171ME (serv.man3) service manuals if exist.