LL-171A (serv.man2) - Sharp Monitor User Guide / Operation Manual. Page 18

1. Without the OSD Menu being displayed, press

the   or the   button.

2. Check that [VOLUME] is selected.

If it is not selected, press the 

 / MODE button

and select [VOLUME].

3. Adjust by pressing the   button (decrease) or 

button (increase).

Note:
- On Screen display for adjustment disappears

several seconds after the last operation.

Color tone or brightness can be changed with one
command.

Displays image with the color tone results from
original scheme of liquid crystal panel.

Display brightness is lowered. (This mode saves
power.)

sRGB is international standard of color
representation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.

Displays an image with dynamic and vivid
primary colors.

- If [DISPLAY MODE] is set to [sRGB] or [VIVID],

[WHITE BALANCE] is set to [STD], and [GAMMA]
is set to [0].

Press the 

 / MODE button when the OSD Menu is

not displayed.
Each time the button is pressed the next menu
item appears. (STD 

→ OFFICE → sRGB → VIVID

→ STD)
On Screen display for adjustment disappears
several seconds after the last operation.

A model name (MODEL), a serial no. (S/N), and
usage time (USAGE  TIME) of the monitor can be
checked.
1. Turn the power off.
2. While pressing the 

 / MODE button, press the

monitor's power button (i.e. turn the power on).
The product information will display.

3. Press the MENU button.

Note:
- Please note that the indication of usage time at

purchase may not be 0 (zero), as a result of
factory inspection and other activities during
manufacture.

171AG_gb.P65

12/4/2003, 1:14 PM

18