R-962M - Sharp Home Appliance Service Manual (repair manual). Page 3

R-962M - 3

Power Requirements

230-240 Volts / 50 Hertz / Single phase, 3 wire earthed

Power Consumption

Microwave cooking  1.4 kW Approx. 6.3A

Dual cooking

(Microwave and Grill)  2.6kW Approx. 10.8A

(Microwave and Convection)  2.7kW Approx. 11.8A

Power Output

900 watts nominal of RF microwave energy (measured by method of IEC 705)
Operating fequency 2450 MHz

Convection heating element Power Output

1.3kW

Grill heating element Power Output

1.2kW (600W x 2)

Case Dimensions

Width 550 mm

Height 342 mm (including foot)

Depth 524 mm

Cooking Cavity Dimensions

Width 390 mm

Height 240 mm

Depth 395 mm

Turntable diameter

360mm

Control Complement

Touch Control System

Timer (0 - 99 min. 90 sec.)
Microwave Cooking Control

HIGH ...........................................  Full power throughout the cooking time
MEDIUM HIGH ............................................  approx. 70% of FULL Power
MEDIUM ......................................................  approx. 50% of FULL Power
MEDIUM LOW .............................................  approx. 30% of FULL Power
LOW .............................................................  approx. 10% of FULL Power

Convection temperature control range;
250˚C, 230˚C, 220˚C, 200˚C, 180˚C, 160˚C, 130˚C, 100˚C, 70˚C and 40˚C

Time pad (10 MIN., 1 MIN., 10 SEC.)

SENSNCOOK pads

AUTO COOK / AUTO DEFROST pads

Kg.Lb / g.oz pads, LESS(

)/MORE(

) pads

MICROWAVE POWER LEVEL pad, CONVECTION TEMP pad

DUAL COOK pad, GRILL pad, STOP/CLEAR pad

AUTO MINUTE START pad, TIMER pad INFO pad

CONVERSION pad, AUTO START/CLOCK pad

Set Weight

Approx. 27 kg

Servicing and repair work must be carried out only by
trained service engineers.

The parts marked '*' on the parts list and schematic
diagram have voltages in excess of 250V.

Removal of the outer wrap gives access to potential
above 250V.

All the parts marked "

∆

" on the parts list may cause undue

microwave exposure, by themselves, or when they are
damaged, loosened or removed.

Do not become exposed to radiation from the
magnetron or other parts conducting microwave
energy.  All input and output microwave connections,
waveguides, flanges and gaskets must be secured.
Never operate the device without a microwave
energy absorbing load attached. Never look into an
open waveguide or antenna while the device is
energized.

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:
GREEN-AND-YELLOW : EARTH        BLUE : NEUTRAL        BROWN : LIVE

If the mains lead is replaced, only part number QACCBA004WRE1 should be used