Read Sharp R-961M (serv.man2) User Guide / Operation Manual online
6
BEFORE OPERATION
SETTING THE CLOCK
After plugging in the oven, if you haven’t pressed STOP/CLEAR, do so now to clear the display.
Your oven is fitted with a 12-hour clock. To set the time of day, follow the guidelines given in the example below:
EXAMPLE:
To set the time of day, 12:35.
To set the time of day, 12:35.
x1
7. Press the AUTO START/ CLOCK
key again to set the clock.
1. Press the AUTO START/CLOCK
key once.
Check the display.
5. Press the AUTO START/
CLOCK key again.
6. Enter the minutes by pressing the
10 MIN key three times and the
1 MIN key five times.
1 MIN key five times.
2. Enter the hours, by pressing
the 10 MIN key once and
the 1 MIN key twice.
the 1 MIN key twice.
NOTES:
• Once the time of day is set, you need only reset
• Once the time of day is set, you need only reset
when the clocks change, if there is a power cut or
if you disconnect the oven from the power socket.
if you disconnect the oven from the power socket.
• If the clock is set and cooking is complete, the
display will return to show the correct time of day.
If the clock has not been set, the display will show:
If the clock has not been set, the display will show:
STOP
/
CLEAR
x1
AUTO START
CLOCK
x1
AUTO START
CLOCK
x1
x2
10min.
1min.
x3
x5
10min.
1min.
STOP
/
CLEAR
Plug in the oven.
1. The oven display will flash the message shown
1. The oven display will flash the message shown
opposite.
2. Press the STOP/CLEAR key.
3. Set the clock, refer to the next section.
4. Heat the oven using the convection without food for
3. Set the clock, refer to the next section.
4. Heat the oven using the convection without food for
20 minutes. (For operation, see NOTES on page 9).
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press twice.
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press twice.
STOP/CLEAR key
x1
AUTO START
CLOCK
Click on the first or last page to see other R-961M (serv.man2) service manuals if exist.