R-95STM (serv.man3) - Sharp Home Appliance User Guide / Operation Manual. Page 11

9

Your oven has an Energy Save Mode.
This facility saves electricity when the oven is not
in use.

• If the oven is not used, it will default to Energy

Save Mode after 3 minutes. The display is blank
and the oven cannot be operated.

• To operate the oven, open and then close the

door. “0” will be displayed and the oven is
ready to use.

To cancel Energy Save Mode, set the clock.
(Please refer to page 10.)

To cancel the clock, follow the procedure
opposite. (This will restart Energy Save Mode.)

Notes:
• If you unplug your oven at any stage you will

have to reset the clock to cancel Energy Save
Mode.

• If the clock has been set, cancelling Energy

Save Mode, then your oven has a safety feature
which prevents SENSOR COOK and
START/AUTO MINUTE key from working
if the oven has not been in use for more than 3
minutes. Press the STOP/CLEAR key or
open and close the door to re-use the oven.

1. Time of day appears on the display.

2. Press the AUTO START/CLOCK

key once.

3. Press the AUTO START/CLOCK key again.

4. Press the START/AUTO MINUTE key

once. The power will be off and the display
will show nothing

VJCM Modular Op Man  23/01/2003  14:45  Page 9