R-957 (serv.man4) - Sharp Home Appliance User Guide / Operation Manual. Page 10

8

Your oven has an energy save mode.
1. Plug in the oven. Nothing will appear on the

display at this time.

2. Open the door. The display will flash the

message shown.

3. Close the door. The display will show “  . 0”.

NOTE: When new, the very first time the grill is

used, smoke and odour will be given off.
To avoid this happening when food is
being cooked, heat the grill without food
for approx. 20 minutes.
(Please refer to note on page 13.)

HIGH

x 1

100%

MEDIUM HIGH

x 2

70%

MEDIUM

x 3

50%

MEDIUM LOW

x 4

30%

(Defrost)

LOW

x 5

10%

(Defrost)

• Your oven has 5 power levels, as shown

opposite.

• To change the power level for cooking, enter

the cooking time and then press the MICRO.
POWER key.

Power level:
The microwave power level is varied by the
microwave energy switching on and off.
When using power levels other than 100% you
will be able to hear the microwave energy pulsing
on and off as the food cooks or defrosts. 

IMPORTANT: The microwave power level will
cook at 100% unless you press the MICRO.
POWER key to the desired setting.

Check the power level:
To check the microwave power level during
cooking, press the MICRO. POWER key.
As long as your finger is pressing the MICRO.
POWER key the power level will be displayed.
The oven continues to count down although the
display will show the power level.

VJCM Modular Op Man  23/01/2003  14:45  Page 8