Read Sharp R-953 (serv.man7) User Guide / Operation Manual online
AUTO START enables you to programme
the oven to cook at any time during the
next 12 hours.
the oven to cook at any time during the
next 12 hours.
IMPORTANT: It is recommended the oven
is always attended when in use. Check to
ensure you have programmed the oven
correctly. Exceeding cooking times and
use of excessive power levels can lead to
food overheating and cause a risk of fire.
is always attended when in use. Check to
ensure you have programmed the oven
correctly. Exceeding cooking times and
use of excessive power levels can lead to
food overheating and cause a risk of fire.
• You can use AUTO START only with manual
cooking.
• Before programming the oven, always check
that the clock has been set and that the display
is showing the correct time of day.
is showing the correct time of day.
26
CONVENIENT FUNCTIONS
Example: Current time of day is 1:00pm and you want to programme the oven to reheat a casserole on
50% (MED) for 20 minutes at 4:00pm.
When the oven starts at 4:00pm, the pre-programmed cooking sequence will start.
The cooking time and mode appear on the display.
The cooking time and mode appear on the display.
Note: See page 8 if you want to set the clock.
1. Press the 1 MIN key 4
times to enter the
desired starting time.
desired starting time.
2. Press the AUTO START/
CLOCK key once.
3. Press the 10 MIN key
twice to enter the desired
cooking time.
cooking time.
4. Press the MICROWAVE
POWER LEVEL key 3
times for 50 % (MED).
times for 50 % (MED).
5. Press the START/AUTO
MINUTE key once to
start the programme.
start the programme.
Check the display.
x4
x1
x2
x3
x1
1min.
10min.
AUTO START
CLOCK
AUTO MINUTE
START
6. AUTO START
• Once the oven is programmed for AUTO
START the display will show the auto start
time.
If you press the AUTO START/CLOCK key and
hold, the time of day will be displayed until you
release your finger from the key.
time.
If you press the AUTO START/CLOCK key and
hold, the time of day will be displayed until you
release your finger from the key.
• If you want to cancel an AUTO START
programme, press the STOP/CLEAR key.
• The AUTO START time can only be entered in
multiples of 10 minutes. It is not possible to
enter less than 10 minutes or any time which is
not in multiples of 10 minutes.
enter less than 10 minutes or any time which is
not in multiples of 10 minutes.
• If the door is opened after programming, close
the door and press the START/AUTO
MINUTE key to continue with AUTO START.
MINUTE key to continue with AUTO START.
R-953/963M O/M 16/03/2000 10:53 Page 26
Click on the first or last page to see other R-953 (serv.man7) service manuals if exist.