R-890SLM (serv.man3) - Sharp Home Appliance User Guide / Operation Manual. Page 7

5

3. The minimum height

of free space 
necessary above 
the top surface of 
the oven is 19cm.

4. Do not place the
 

oven where heat, moisture or high humidity are
generated, (for example, near or above a
conventional oven) or near combustible 
materials (for example, curtains). Do not block 
or obstruct air vent openings. Do not place 
objects on top of the oven.

5. Make sure the power supply cord is undamaged 

(See “ELECTRICAL CONNECTION” below).

  Do not allow the power supply cord 

6. The socket must be readily accessible so that 

it can be easily unplugged in an emergency.

7. Do not use the oven outdoors.

BUILDING-IN-KIT.
This oven is designed for counter top or built-in use.
Do not place the oven in  a cabinet.
An installation frame is available which enables 
the microwave oven to be integrated within a 
kitchen unit.
The microwave oven is not designed to be built 
above or near a conventional oven.
SHARP recommend the use of the build in kit 
EBR-5000, available from your SHARP dealer. 
Only the use of this frame will guarantee the 
quality and safety of the oven.

ELECTRICAL CONNECTION.
• Do not allow water to come into contact with 

the power supply cord or plug.

• Insert the plug properly into the socket.
• Do not connect other appliances to the same 

socket using an adaptor plug.

• If the power supply cord is damaged, it must 

be replaced by a SHARP approved service 
facility or a similarly qualified person to avoid 
a hazard. 

• When removing the plug from the socket 

always grip the plug, never the cord as this 
may damage the power supply cord and the 
connections inside the plug.

• If the plug fitted to your oven is a rewireable 

type and in the event of the socket outlet 
in your home not being compatible with the 
plug supplied, remove the plug properly 
(do not cut off). 

•  If the plug fitted to your oven is a non-rewirable 

type and in the event of the socket outlet in 
your home not being compatible with the plug 
supplied, cut-off the mains plug.

• Refit with a suitable type, observing the wiring 

code given in ‘To replace the mains plug’ on 
page 38.

To wire an appropriate plug, follow the wiring 
code given in `To replace the mains plug’ on 
page 38.

IMPORTANT!
•  The fuse from the cut-off plug should be removed

and the plug disposed of in a safe manner.

• Under no circumstances should the cut-off plug 

be inserted into a socket outlet as a serious 
electric shock may occur.

•  The plug must not be used without the fuse cover

fitted.

• If you have any doubt about your microwave 

oven obtain the help of a qualified electrician.

• When replacing the plug please ensure that 

you use a BSI or ASTA approved plug to 
BS1363, this should be fitted with a brown 
coloured 13 amp fuse approved by BSI or 
ASTA to BS1362. If you have any doubt 
about electrical connection seek the help of a 
qualified electrician. 

R-890SLM_EN.indd   5

R-890SLM_EN.indd   5

2/24/09   4:06:16 PM

2/24/09   4:06:16 PM