Read Sharp R-84ST (serv.man3) Service Manual online
R-84STM - 3
WARNING
Servicing and repair work must be carried out only by
trained service engineers.
trained service engineers.
The parts marked '*' on the parts list and schematic
diagram have voltages in excess of 250V.
diagram have voltages in excess of 250V.
Removal of the outer wrap gives access to potential
above 250V.
above 250V.
All the parts marked "
∆" on the parts list may cause undue
microwave exposure, by themselves, or when they are
damaged, loosened or removed.
damaged, loosened or removed.
CAUTION
MICROWAVE RADIATION
Do not become exposed to radiation from the
magnetron or other parts conducting microwave
energy. All input and output microwave connections,
waveguides, flanges and gaskets must be secured.
Never operate the device without a microwave
energy absorbing load attached. Never look into an
open waveguide or antenna while the device is
energized.
magnetron or other parts conducting microwave
energy. All input and output microwave connections,
waveguides, flanges and gaskets must be secured.
Never operate the device without a microwave
energy absorbing load attached. Never look into an
open waveguide or antenna while the device is
energized.
CAUTION / WARNING
WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
GREEN-AND-YELLOW
: EARTH
BLUE
: NEUTRAL
BROWN
: LIVE
If the mains lead is replaced, only part number QACCBA004URE3 should be used
Click on the first or last page to see other R-84ST (serv.man3) service manuals if exist.