R-82FBSTM (serv.man4) - Sharp Home Appliance User Guide / Operation Manual. Page 12

10

Your oven has a 12 hour and a 24 hour clock.

• To select the 12 hour clock, press the

CLOCK SET button once.
“12H” will appear on the display.

To set the time of day follow the instructions
opposite.

NOTES: 
• Press the STOP/CLEAR button if you make a

mistake during programming.

• To check the time of day during a cooking

process, press the CLOCK SET button and
the time of day will remain on the display as
long as you keep your finger on the button.
This does not affect the cooking process.

• If the clock is set, when cooking is complete,

the display will show the correct time of day.
If the clock has not been set, the display will
only show “.0” when cooking is complete.

• If the electrical power supply to your

microwave oven is interrupted, the display will
intermittently show “.0” after the power is
reinstated. If this occurs during cooking, the
programme will be erased. The time of day will
also be erased. 

• When you want to reset the time of day,

follow the opposite example again.

• To select the 24 hour clock, press the

CLOCK SET button twice.
“24H” will appear on the display.

1. Select the clock type required.

2. Enter the hours by turning the

TIME/WEIGHT knob.

3. Press the CLOCK SET button once.

4. Enter the minutes by turning the

TIME/WEIGHT knob.

5. To start the clock, press the CLOCK SET

button once.

R-82FBSTM Op Man  18/08/2004  09:01  Page 10