R-772M (serv.man4) - Sharp Home Appliance User Guide / Operation Manual. Page 9

7

Your oven has an Energy Save Mode. This facility saves electricity when the oven is not in use.
When you have unpacked your oven and assembled the turntable correctly (please refer to pages 2 & 4)
plug the oven into your electricity supply. Open & close the door. “0” will appear on the display. The oven
is now ready for use.
The oven will default to Energy Save Mode after 2 minutes if not used. In Energy Save Mode the display is
blank and the oven cannot be operated.
To cancel Energy Save Mode:
i) Open & close the door. “0” will be displayed and the oven is ready for use.
ii) Set the clock. Please refer to “Setting the clock” on page 6. (To revert back to Energy Save Mode,
follow the procedure below).
Note: If you unplug your oven at any stage you will have to reset the clock to cancel Energy Save Mode.

To start Energy Save Mode when the clock is set.

1. Make sure 

the correct 
time appears 
on the display.

2. Press the AUTO

START/CLOCK
key twice.

3. Press the START/AUTO

MINUTE key. The 
power will be off and 
the display will show

nothing.

AUTO START

CLOCK

AUTO MINUTE

START

“PRESS START TO SET
ENERGY SAVE MODE”
will appear in the
display.

R-772M OPE MAN  28/6/99  10:18 am  Page 7