Read Sharp R-761M (serv.man3) User Guide / Operation Manual online
BEFORE OPERATION
INSTALLATION
5
Plug in the oven.
1. The oven display will flash:
1. The oven display will flash:
2. Press the STOP/CLEAR key the display will show:
(Heat the grill with the oven empty for 20 minutes.
See the NOTE and the instructions for grilling on
page 9).
See the NOTE and the instructions for grilling on
page 9).
To set the clock, refer to the next page.
1.
2.
x1
STOP/
CLEAR
BUILDING-IN-KIT.
An installation frame is available which enables the
microwave oven to be integrated within a kitchen unit.
microwave oven to be integrated within a kitchen unit.
The microwave oven is not designed to be built above
or near a conventional oven.
or near a conventional oven.
SHARP recommend the use of the build in kit, EBR-
4500, available from your SHARP dealer. Only the
use of this frame will guarantee the quality and safety
of the oven. When building, follow installation
instructions (for B type) supplied carefully.
4500, available from your SHARP dealer. Only the
use of this frame will guarantee the quality and safety
of the oven. When building, follow installation
instructions (for B type) supplied carefully.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
wiring to overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, do not operate the oven, it must
be replaced by the manufacturer or their service
agent or a similarly qualified person in order to
avoid a hazard. A defective plug, power supply
cord or socket may overheat and catch fire during
operation or cause an electrical shock.
be replaced by the manufacturer or their service
agent or a similarly qualified person in order to
avoid a hazard. A defective plug, power supply
cord or socket may overheat and catch fire during
operation or cause an electrical shock.
• When removing the plug from the socket always
grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.
damage the power supply cord and the
connections inside the plug.
• The product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in ‘To replace the
mains plug’on page 55.
remove the plug and fit an appropriate type,
observing the wiring code given in ‘To replace the
mains plug’on page 55.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in ‘To replace the mains plug’ on page 53.
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in ‘To replace the mains plug’ on page 53.
Click on the first or last page to see other R-761M (serv.man3) service manuals if exist.