Read Sharp R-743 Service Manual online
13
743M -
RE-INSTALL
1. Re-install the front door glass to the door frame as
follows.
1) Insert the upper edge of the front door glass into the six
(6) tabs of the door frame.
2) Slide the front door glass downwards and insert the
lower edge of the front door glass into the six (6) tabs of
the door frame.
the door frame.
3) Slide the front door glass rightwards and insert the right
edge of the front door glass into the one (1) tab of the
door frame.
door frame.
2. Re-install the glass stopper to the door frame as follows.
1) Re-install the glass stopper to the door frame so that the
1) Re-install the glass stopper to the door frame so that the
two (2) holes of the glass stopper meet the two (2) pins
of the door frame.
of the door frame.
2) Hold the glass stopper to the door frame with the two (2)
screws.
3. Re-install the latch spring to the latch head. Re-install
the latch spring to the door frame. Re-install latch head
to door frame.
to door frame.
4. Re-install door panel to door frame by fitting eight (8)
tabs of door frame to eight (8) holes of door panel.
5. Fit the door panel to the door frame with four (4) screws.
6. Inserttwo (2) pins of door panel on two (2) hole of upper
6. Inserttwo (2) pins of door panel on two (2) hole of upper
and lower oven hinges.
7. Re-install choke cover to door panel .
Note: After any service to the door;
Make sure that door sensing switch and monitored
latch switch are operating properly.
latch switch are operating properly.
Figure C-6. Door Replacement
DOOR FILM
Removal
1. Tear the door film from the door panel.
2. Now, the door film is free.
2. Now, the door film is free.
Installation
1. Pull the tab on the backing film of the door film as shown
in Fig. 7.
2. Tear the backing film by pulling the tab.
3. Put the pasted side of the door film on the door panel.
3. Put the pasted side of the door film on the door panel.
Door film
Finger tab
Backing film
PIN
PIN
LOWER
OVEN HINGE
OVEN HINGE
UPPER
OVEN HINGE
OVEN HINGE
LOWER
OVEN HINGE
OVEN HINGE
CHOKE COVER
DOOR
PANEL
PANEL
DOOR SUB
ASSEMBLY
ASSEMBLY
COMPONENT REPLACEMENT AND ADJUSTMENT
Figure C-7. Door film
