Read Sharp R-734 (serv.man6) User Guide / Operation Manual online
7
BEFORE OPERATION
ENGLISH
SETTING THE CLOCK
Plug in the oven.
1. The oven display will flash:
1. The oven display will flash:
2. Press the STOP button, the display will show:
3. To set the clock, see below.
4. Heat the oven without food. (See page 6 or page
4. Heat the oven without food. (See page 6 or page
10, Note 2).
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
1. Choose the clock function.
(12 hour clock).
Choose the 24 hour
clock.
clock.
3. Press the COOKING
MODE button to change
from hours to minutes.
from hours to minutes.
4. Set the minutes. Rotate the
TIMER/WEIGHT/POWER
knob until the correct minute is
displayed (35).
knob until the correct minute is
displayed (35).
5. Press the COOKING
MODE button to start
the clock.
the clock.
2. Set the hours. Rotate the TIMER/WEIGHT/
POWER knob until the correct hour is
displayed (23).
displayed (23).
x1 and hold for 3 seconds
x1
x1
x1
Example:
To set the 24 hour clock to 23:35.
To set the 24 hour clock to 23:35.
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the COOKING MODE button down for 3
1. To set the 12 hour clock, hold the COOKING MODE button down for 3
seconds. will appear in the display.
2. To set the 24 hour clock, press the COOKING MODE button once more
after Step 1, in the example below
will appear in the display.
x1 and hold for 3 secs.
To set the clock, follow the example below.
NOTES:
1. You can rotate the TIMER/WEIGHT/POWER
1. You can rotate the TIMER/WEIGHT/POWER
knob clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated.
If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
R-734/F English 22/1/01 12:20 pm Page 7
Click on the first or last page to see other R-734 (serv.man6) service manuals if exist.