Read Sharp R-671M Service Manual online
R-671M - 2
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained service engineers.
Removal of the outer wrap gives access to potential above 250V.
All the parts marked "
∆
" on the parts list may cause undue microwave exposure, by themselves, or when they
are damaged, loosened or removed.
Never operate the Grill and/ or Bottom heater with the oven outer cabinet removed.
(Because air flow is
eliminated, and the excess heat generated on adjacent components).
It can cause permanent damage or fire.
SHARP CORPORATION
OSAKA, JAPAN
SERVICE MANUAL
MICROWAVE OVEN WITH TOP AND BOTTOM GRILL
R-671(B)M / R-671(W)M
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp. Service engineers with Operation and Service Information.
It is recommended that service engineers carefully study the entire text of this manual, so they will be qualified to render
satisfactory customer service.
satisfactory customer service.
WARNING
MICROWAVE RADIATION
Service engineers should not be exposed to the microwave energy which may radiate from the
magnetron or other microwave generating devices if it is improperly used or connected. All input and
output mirowave connections, waveguides, flanges and gaskets must be secured. Never operate the
device without a microwave energy absorbing load attached. Never look into an open waveguide or
antenna while the device is energized.
magnetron or other microwave generating devices if it is improperly used or connected. All input and
output mirowave connections, waveguides, flanges and gaskets must be secured. Never operate the
device without a microwave energy absorbing load attached. Never look into an open waveguide or
antenna while the device is energized.
Click on the first or last page to see other R-671M service manuals if exist.