Read Sharp R-652M (serv.man3) User Guide / Operation Manual online
5
INSTALLATION
BUILDING-IN-KIT.
This oven is not designed to be built into a kitchen unit.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
wiring to overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, it must be replaced with a
special cord. The exchange must be made by an
authorised SHARP service agent. A defective plug,
power supply cord or socket may overheat and
catch fire during operation or cause an electrical
shock.
special cord. The exchange must be made by an
authorised SHARP service agent. A defective plug,
power supply cord or socket may overheat and
catch fire during operation or cause an electrical
shock.
• When removing the plug from the socket always
grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.
damage the power supply cord and the
connections inside the plug.
• The product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 40.
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 40.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 40.
.
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 40.
.
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP/CLEAR key the display will
1. The oven display will flash:
2. Touch the STOP/CLEAR key the display will
show:
To set the clock, see page 6.
Use of the STOP/CLEAR key.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
1.
2.
STIR
TURN
KG
GRILL
MICRO COOK
STIR
TURN
KG
GRILL
MICRO COOK
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
20 minutes. See note on page 9.
STOP/
CLEAR
STOP/
CLEAR
Click on the first or last page to see other R-652M (serv.man3) service manuals if exist.