Read Sharp R-64 (serv.man7) User Guide / Operation Manual online
Website: http://www.sharp.co.uk/support
Help Line: 08705 274277 (office hours)
BEFORE OPERATION
SETTING THE CLOCK
7
Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR button.
3. The display will show:
To set the clock, see below.
1. The oven display will flash:
2. Press the STOP/CLEAR button.
3. The display will show:
To set the clock, see below.
When using the oven for the first time:
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
1.
2.
3.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will only show
when cooking is complete.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show:
after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
• When you want to reset the time of day, follow the above example again.
x1
1. To set the 12 hour clock, press the COOKING MODE button and
hold for 3 seconds, will appear in the display.
2. To set the 24 hour clock, press the COOKING MODE button once
more after step 1,
will appear in the display.
2. To enter the hours rotate the
TIME/KG/POWER knob
clockwise/counter-clockwise
until 23 is displayed.
clockwise/counter-clockwise
until 23 is displayed.
Check the display.
Example: To set the 24 hour clock to 23:35
4. To enter the minutes rotate the
TIME/KG/POWER knob
clockwise until 35 is displayed.
clockwise until 35 is displayed.
3. To change from hours to
minutes press the
COOKING MODE
button once.
COOKING MODE
button once.
5. To start the clock press
the COOKING MODE
button once.
button once.
x1 and hold for
3 seconds.
3 seconds.
There are two setting modes: 12 hour clock and 24 hour clock.
x1
x1 and hold
for 3 seconds.
for 3 seconds.
Select the 24
hour clock.
hour clock.
1. Select the clock
function.
x1
x1
R-64STM O/M & C/B 5/4/01 8:53 am Page 7
Click on the first or last page to see other R-64 (serv.man7) service manuals if exist.