Read Sharp R-393 (serv.man9) User Guide / Operation Manual online
6
BEFORE OPERATION
SETTING THE CLOCK
Before operating the oven, make sure you read and understand this operation
manual.
1. Plug in the oven. Select SET CLOCK or DEMO MODE.
2. Touch SET CLOCK and follow the instructions below.
NOTES: 1. If no choice is made for 30 seconds, the Demo Mode will begin
manual.
1. Plug in the oven. Select SET CLOCK or DEMO MODE.
2. Touch SET CLOCK and follow the instructions below.
NOTES: 1. If no choice is made for 30 seconds, the Demo Mode will begin
automatically. To cancel the Demo Mode, press the STOP/CLEAR
key and the screen will return to the Home Page. To set the clock,
press the SET UP key, touch CLOCK and follow the directions on
the Touch screen.
key and the screen will return to the Home Page. To set the clock,
press the SET UP key, touch CLOCK and follow the directions on
the Touch screen.
2. If you do not want to set the clock, press the STOP/CLEAR key
once. The screen will go to the Home Page without the time of day.
Use the STOP/CLEAR key to:
1. Return to the Home Page screen, if you make a mistake during
1. Return to the Home Page screen, if you make a mistake during
programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press twice.
3. Cancel a programme during cooking, press twice.
DEMO MODE
SET CLOCK
TOUCH SCREEN
Demo Mode provides a
summary of oven features.
summary of oven features.
10 MIN 1 MIN
HOUR
12 : 00 AM
Enter time of day and then
touch AM or PM.
touch AM or PM.
Press START to confirm
AM/PM
2
3
1
5
6
4
8
9
7
0
POWER
KITCHEN
TIMER
12 : 30 PM
10 MIN 1 MIN
HOUR
12 : 30 AM
Enter time of day and then
touch AM or PM.
touch AM or PM.
Press START to confirm
AM/PM
10 MIN 1 MIN
HOUR
12 : 30 PM
Enter time of day and then
touch AM or PM.
touch AM or PM.
Press START to confirm
AM/PM
STOP
CLEAR
STOP/CLEAR key.
Your oven is fitted with a 12 hour clock.
To set the time of day:
Example:
To set the 12 hour clock to 12:30 PM:
To set the time of day:
Example:
To set the 12 hour clock to 12:30 PM:
1. After touching SET CLOCK,
enter the time of day (hour)
by touching HOUR 11 times.
by touching HOUR 11 times.
2. Enter the time of day (minutes)
by touching 10 MIN 3 times.
3. Select AM or PM, then press
the START/AUTO MINUTE
key to set the clock.
key to set the clock.
The clock will start and the display
will return to the Home Page.
Check the display.
will return to the Home Page.
Check the display.
NOTES:
1. Press the STOP/CLEAR key if you make a mistake during programming.
1. Press the STOP/CLEAR key if you make a mistake during programming.
The Home Page will appear. To set the clock again, press the SET UP key
on the control panel. Then touch CLOCK/AUTOSTART and
CLOCK. Then follow the instructions on the Touch Screen. At this time, the
BACK arrow will appear for steps 1-3.
on the control panel. Then touch CLOCK/AUTOSTART and
CLOCK. Then follow the instructions on the Touch Screen. At this time, the
BACK arrow will appear for steps 1-3.
2. If you want to reset the time of day, press the SET UP key and follow the
directions.
3. If the electrical power supply to your microwave oven is interrupted, the
screen will show SET CLOCK or DEMO MODE after the power is
reinstated. If this occurs during cooking, the programme will be erased.
Simply touch SET CLOCK and follow the instructions.
reinstated. If this occurs during cooking, the programme will be erased.
Simply touch SET CLOCK and follow the instructions.
4. If you continuously touch HOUR, 10 MIN or 1 MIN on the Touch
Screen, the time will count up automatically.
R-393M O/M & C/B 08/06/2000 16:04 Page 6
Click on the first or last page to see other R-393 (serv.man9) service manuals if exist.