Read Sharp R-362M (serv.man4) User Guide / Operation Manual online
6
SETTING THE CLOCK
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash the message
1. The oven display will flash the message
shown opposite.
2. Press the STOP/CLEAR key.
3. Set the clock, refer to the next section.
3. Set the clock, refer to the next section.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during
1. Erase a mistake during programming.
2. Stop the oven temporarily during
cooking.
3. Cancel a programme during cooking,
press twice.
STOP/
CLEAR
STOP/CLEAR key
After plugging in the oven, if you haven’t pressed STOP/CLEAR, do so now to clear the display.
Your oven is fitted with a 12-hour clock. To set the time of day, follow the guidelines given in the example below:
EXAMPLE:
To set the time of day, 12:35.
To set the time of day, 12:35.
7. Press the AUTO START/ CLOCK
key again to set the clock.
1. Press the AUTO START/CLOCK
key once.
Check the display.
5. Press the AUTO START/
CLOCK key again.
6. Enter the minutes by pressing the
10 MIN key three times and the
1 MIN key five times.
1 MIN key five times.
2. Enter the hours, by pressing
the 10 MIN key once and
the 1 MIN key twice.
the 1 MIN key twice.
NOTES:
• Once the time of day is set, you need only reset when
• Once the time of day is set, you need only reset when
the clocks change, if there is a power cut or if you
disconnect the oven from the power socket.
disconnect the oven from the power socket.
• If the clock is set and cooking is complete, the display
will return to show the correct time of day. If the clock
has not been set, the display will show:
has not been set, the display will show:
STOP/
CLEAR
x1
AUTO START
CLOCK
x1
10min.
1min.
10min.
1min.
AUTO START
CLOCK
AUTO START
CLOCK
x1
x1
x2
x3
x5
x1
Click on the first or last page to see other R-362M (serv.man4) service manuals if exist.