Read Sharp R-32STM (serv.man2) User Guide / Operation Manual online
NOTE:
1. If you press any of the time keys too many times, continue to press until
1. If you press any of the time keys too many times, continue to press until
your desired time appears.
2. Press the STOP/CLEAR key if you make a mistake during programming.
3. If the electrical power supply to your microwave oven is interrupted, the
3. If the electrical power supply to your microwave oven is interrupted, the
display will intermittently show: after the power is reinstated.
If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
4. When you want to reset the time of day, follow the above example again.
6
SETTING THE CLOCK
1. To set the 12 hour clock, press the
AUTOSTART/CLOCK key once,
will appear in the display.
2. To set the 24 hour clock, press the AUTOSTART
/CLOCK key twice,
will appear in the
display.
x2
x3
Select the
24-hour clock.
24-hour clock.
To enter the hours
press the 10 MIN
key twice.
press the 10 MIN
key twice.
Check the display:
To set the time of day:
Example:
To set the 24 hour clock to 23:35:
Example:
To set the 24 hour clock to 23:35:
x2
Then the 1 MIN
key 3 times.
key 3 times.
x5
x1
x3
To enter the minutes
press the 10 MIN
key 3 times.
press the 10 MIN
key 3 times.
To change from hours to
minutes press the
AUTOSTART /CLOCK
key once.
minutes press the
AUTOSTART /CLOCK
key once.
Then press the
1 MIN key 5 times.
1 MIN key 5 times.
To start the clock press the
AUTOSTART/CLOCK
key once.
AUTOSTART/CLOCK
key once.
x1
x1
x2
There are two setting modes: 12 hour clock and 24 hour clock:
Click on the first or last page to see other R-32STM (serv.man2) service manuals if exist.