Read Sharp R-25STM (serv.man2) User Guide / Operation Manual online
2
YOUR OVEN AND ACCESSORIES
1
2
8
3
5
6
7
11
4
OVEN:
1. Control panel
2. Oven lamp
3. Waveguide cover (DO NOT REMOVE)
4. Seal packing
5. Oven cavity
6. Door seals and sealing surfaces
7. Door latches
8. Door opening handle
9. Ventilation openings
10. Outer cabinet
11. Power cord
1. Control panel
2. Oven lamp
3. Waveguide cover (DO NOT REMOVE)
4. Seal packing
5. Oven cavity
6. Door seals and sealing surfaces
7. Door latches
8. Door opening handle
9. Ventilation openings
10. Outer cabinet
11. Power cord
9
10
12
13
ACCESSORIES:
Check to make sure the following accessories are
provided:
12. Turntable
13. Roller stay
Check to make sure the following accessories are
provided:
12. Turntable
13. Roller stay
• Place the roller stay in the seal packing on the
oven floor, then place the turntable on to the
roller stay, ensuring it is located firmly.
roller stay, ensuring it is located firmly.
• To avoid turntable damage, ensure dishes or
containers are lifted clear of the turntable rim
when removing them from the oven.
when removing them from the oven.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it
is not damaged.
• After cooking fatty foods without a cover, always clean the cavity thoroughly, this must be dry and
free from grease. Built-up grease may overheat and begin to smoke or catch fire.
• Always operate the oven with the turntable and roller stay fitted correctly. This promotes thorough,
even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage
to the oven.
to the oven.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you
start the oven. This does not affect cooking performance.
• When you order accessories, please quote both the PART NAME and MODEL NUMBER to
your dealer or SHARP approved service facility. The model number is located at the bottom of the
control panel.
control panel.
WARNING:
The door, outer cabinet, oven cavity, turntable and dishes will become very hot during
operation. To prevent burns, always use thick oven gloves.
operation. To prevent burns, always use thick oven gloves.
R-25STM Operation Manual 11/03/2005 14:04 Page 2
Click on the first or last page to see other R-25STM (serv.man2) service manuals if exist.