Read Sharp R-24AT (serv.man4) User Guide / Operation Manual online
A35558,SUK R22AT/24AT O/M
SPECIFICATIONS:
AC Line voltage ........................... Single phase 230-240V, 50Hz
AC Power required ...................... R-24AT : 2.9kW
AC Power required ...................... R-24AT : 2.9kW
.................................................... R-22AT : 2.4kW
Output power .............................. R-24AT : 1900W (IEC 60705)
.................................................... R-22AT : 1500W (IEC 60705)
Microwave frequency .................. 2450MHz* (Group 2 / Class B)
Sound level ................................. less than 70dB (A)
Outside dimensions .................... 510(W) x 335(H) x 470(D) mm
Sound level ................................. less than 70dB (A)
Outside dimensions .................... 510(W) x 335(H) x 470(D) mm
(Single)
510(W) x 670(H) x 470(D) mm
(Two ovens stacked)
510(W) x 670(H) x 470(D) mm
(Two ovens stacked)
TINSEB
327
WRRZ-K22
Printed in Thailand
•
•
•
* This Product fulfils the requirement of the European
standard EN55011. In conformity with this standard,
this product is classified as group 2 class B
equipment. Group 2 means that the equipment
intentionally generates radio-frequency energy in the
form of electromagnetic radiation for heating
treatment of food. Class B equipment means that the
equipment suitable to be used in domestic
establishments.
(This product is designed for commercial application
only and as such it falls outside the scope of
Regulation (EC) 1275/2008 implementing EU Directive
2005/32/EC on eco-design requirements for standby
and off mode electric power consumption. Sharp do
not recommend the product for domestic application
and will not accept any liability for such use.)
this product is classified as group 2 class B
equipment. Group 2 means that the equipment
intentionally generates radio-frequency energy in the
form of electromagnetic radiation for heating
treatment of food. Class B equipment means that the
equipment suitable to be used in domestic
establishments.
(This product is designed for commercial application
only and as such it falls outside the scope of
Regulation (EC) 1275/2008 implementing EU Directive
2005/32/EC on eco-design requirements for standby
and off mode electric power consumption. Sharp do
not recommend the product for domestic application
and will not accept any liability for such use.)
Attention:
Your product is
marked with this
symbol.
It means that
products should
not be mixed
with general
household
waste. There is
a separate
collection
products.
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires
proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old product free of charge if you purchase a
similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately
beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires
proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old product free of charge if you purchase a
similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately
beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t
purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t
purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your
local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your
local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
Manufacturer:
SHARP Corporation
22-22, Nagaike-cho, Abeno-ku, Osaka 545-8522, Japan
22-22, Nagaike-cho, Abeno-ku, Osaka 545-8522, Japan
Authorised Representative: SHARP Electronics (U.K.) Ltd
4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ.
London, U.K.
London, U.K.
SUK R22AT/24AT O/M,Cover
12.4.5, 1:36 PM
2
