Read Sharp R-247 (serv.man2) User Guide / Operation Manual online
8
SETTING THE CLOCK
Your oven has a 12 hour and a 24 hour clock.
• To select the 12 hour clock, press and hold the
POWER/WEIGHT key for 3 seconds,
will
appear on the display.
• To select the 24 hour clock, press and hold the
POWER/WEIGHT key for 3 seconds, then press
again.
again.
will appear on the display.
To set the time of day follow the instructions below:
x1 and hold for 3 seconds.
1. x1 and hold for 3 seconds.
2. x1 again.
2. x1 again.
1. Select the
clock type
required.
required.
2. Enter the hours by
pressing the TIME keys.
x1
4. Enter the minutes by
pressing the TIME keys.
5. To start the clock, press
the POWER/WEIGHT
key once.
key once.
x1
NOTES:
• Press the STOP/CLEAR key if you make a mistake during programming.
• If you press any of the TIME keys too many times, continue to press the key until the desired time
• Press the STOP/CLEAR key if you make a mistake during programming.
• If you press any of the TIME keys too many times, continue to press the key until the desired time
re-appears.
• If the clock is set, when cooking is complete, the display will show the correct time of day.
If the clock has not been set, the display will only show
when cooking is complete.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently
show
after the power is reinstated. If this occurs during cooking, the programme will be
erased. The time of day will also be erased.
• When you want to reset the time of day, follow the above example again.
3. Press the
POWER/WEIGHT
key once.
key once.
UK R-247 O/M -P24 03.12.8 9:22 PM Page 8
Click on the first or last page to see other R-247 (serv.man2) service manuals if exist.