R-232M (serv.man2) - Sharp Home Appliance User Guide / Operation Manual. Page 7

5

Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR button, the display will

show:

To set the clock, see the following page.

1.

2.

Stop/Clear

BUILDING-IN-KIT.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the

power supply cord or plug.

• Insert the plug properly into the socket as the plug

may otherwise overheat and catch fire.

• Do not connect other appliances to the same socket

using an adaptor plug as it may cause the house
wiring to overheat and catch fire.

• If the power supply cord of this appliance is

damaged, it must be relaced by a special cord. 
The exchange must be made by an authorised
SHARP service agent. 
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.

• When removing the plug from the socket always

grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.

• The product is fitted with a re-wireable plug. Should

it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 24.

If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician. 

WARNING 
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the
wiring code on page 24.

R-232M O/M&C/B  11/6/99  11:44 am  Page 5