VENTA (serv.man13). Registration Manual - July 2002 - Sharp EPOS Service Manual (repair manual). Page 2

Read Sharp VENTA (serv.man13) Service Manual online

VENTA Registration Procedure
Introduction
It is necessary to register Venta Software for use on an End-User site. The
Demonstration supplied by Sharp will allow the use of all functions fully. However
if the software is installed on site a registration must be obtained. This
registration is linked to the :-
Site name
Site Postcode
Site VAT Number
Number of Tills on the system
Option code if there are to be any premium options included
All information MUST be given to obtain a Registration Number
Once the software has been registered an invoice will be sent for the quoted
amount times the number of tills. If a site requires more POS units after the
initial order, please remember to inform the ECR/EPOS department when
requesting a new registration or an invoice will be sent for the total number of
POS units on site.
It is possible however to set up a new customer site by using the “Test
Information File” from the demo application as long as the system details are
entered in “System Parameters” as detailed in the Demo Application. It is also
possible to use the live customer data to test the system prior to registration, the
application will be restricted as follows :-
1.  ALL printouts will print “Unregistered”
2.  Reports will be restricted to the first 50 PLU’s, 2 Departments and 1 Group
3.  On Application Boot the system will report “Unregistered Copy”
N.B Failure to provide this information OR incorrect information being
identified on site will result in NO SUPPORT being provided by the
Sharp ECR/EPOS Support Department and possible legal action.
Page of 5
Display

Click on the first or last page to see other VENTA (serv.man13) service manuals if exist.