Read Sharp VENTA PRO V3 (serv.man8) Service Manual online
Sharp Electronics (UK) Ltd
Page 117 of 249
Venta Pro Complete Supplementary Manual January 2009
72. Messaging
A messaging facility has now been added to Venta PRO. The purpose is to allow
messages to be sent to individual POS/Servers. In addition printer failure messages can
also be sent to individual servers or Tills.
messages to be sent to individual POS/Servers. In addition printer failure messages can
also be sent to individual servers or Tills.
Due to the complexities of this function ALL settings are in S2001.INI. These should be
customised at installation. There should only be a limited requirement to change these
settings so they will remain in S2001.INI
customised at installation. There should only be a limited requirement to change these
settings so they will remain in S2001.INI
It is also possible to send messages from the POS using a new function.
It is possible to send messages to individual Tills or Servers or multiples of.
Programming
POS Sent Messages – These can be activated and read using the new function Keys
(F93 – View Message and F94 Compose Message). They can also be sent from an
external device using the structure in
(F93 – View Message and F94 Compose Message). They can also be sent from an
external device using the structure in
These keys can be added to the List so that messages can be read and written. The
“Compose Message” could be put on one machine only. Both keys can also be under
management control. If the Compose Message key is pressed the following screen is
displayed.
“Compose Message” could be put on one machine only. Both keys can also be under
management control. If the Compose Message key is pressed the following screen is
displayed.
Click on the first or last page to see other VENTA PRO V3 (serv.man8) service manuals if exist.