VENTA PRO V3 (serv.man191). Version History (Bugs and Specification changes) Up to Venta Pro V3.1.1071 - Sharp EPOS Driver / Update

venta pro v3 (serv.man191) driver / update
Model
VENTA PRO V3 (serv.man191)
Pages
21
Size
340.4 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / Version History (Bugs and Specification changes) Up to Venta Pro V3.1.1071
File
venta-pro-v3-sm191.pdf
Date

Read Sharp VENTA PRO V3 (serv.man191) Driver / Update online

Venta Pro V3.1.1071 VPM V1.2.200 
 
Version History (Bugs and Specification changes) 
(See the V3 supplementary manual for programming details) 
 
17/07/12   
 
 
282 
With the External interface 
– EFT – set as Commidea Ocius II, with or without 
EFTOCIUSFIXEDWAIT=1.  Uses F40 for its authority level 
With the External interface 
– EFT – set as Commidea Ocius, with or without 
EFTOCIUSWAIT=1.  Uses F40 for its authority level 
 
 
281 
VAT calculation was not taking in to account item promos. Now fixed 
 
 
280 
Timeout for EftOcius2 Wait increased from 5 to 10s 
 
 
23/01/12 
Venta Pro V3.1.1041 VPM V1.2.200 
 
 
279 
When a payment method was set for over tender and change, the change 
amount was being deducted twice in the cashrsp file. Now fixed 
 
 
278 
End of Day Backups will now begin after all End Of Day printing has been 
performed. On previous versions printing waited until the EOD backup had 
completed. 
 
 
06/01/12 
Venta Pro V3.1.1038 VPM V1.2.200 
 
 
277 
Feature Added 
Using the S2001.ini CASHRSP_LDISC=0 It is now possible when performing 
loyalty discounts for the cashrsp to replace $LDISC and $LVDISC with $SDISC 
and $SVDISC (these are the normal entries for discounts). 
 
 
276 
Feature Added 
TABLENAMEONRCT=1 
Now allows the table name rather than number to printed on bill and receipt 
 
 
275 
Feature Added 
Prepayment of more than one deposit is now possible. 
 
 
274 
Deposits could be refunded multiple times. now fixed 
 
 
273 
The popup qwerty keyboard under some circumstances was blocking certain 
Venta Pro processes (hence connected/disconnected in log). Also spooler 
(blocked KPs). Now fixed 
 
 
13/10/11 
Venta Pro V3.1.1026 VPM V1.2.200 
 
272 
Queued button presses could be misinterpreted when changing displayed lists. 
An example of this was that a refund was being applied even though the refund 
key was not on a list. Now fixed 
 
 
24/08/11 
Venta Pro V3.1.1024 VPM V1.2.200 
 
Features added 
epson ub-e02 ethernet card support: 
The Epson Printer Ethernet adaptor UB-E02 now works with Venta Pro V3 
 
 
271 
If Analysis Shift (F123) was set for Log. Venta Pro V3 would crash. Now fixed. 
 
 
270 
Voucher logo text was not being centralised. Now fixed. The System 
configuration General logo text should not include leading spaces. 
 
 
269 
Logwood Kitchen Monitor 
– it is now possible to include the analysis for desserts 
this was not available in original interface. 
 
 
268 
Ocius2 bill printed from eft terminal - now always non-itemized 
 
 
267 
Bitmaps images on buttons could disappear. Now fixed. 
 
 
266 
When using Promo with VAT in MM the vat is assigned to wrong vat band. Now 
fixed. 
 
 
265 
To avoid the NoticeBoard covering message boxes, Noticeboard is hidden when 
the message box is waiting for user response, and restored if needed afterwards. 
 
 
264 
NoticeBoard wasn't using saved position if outside narrow pre-defined region; 
now fixed 
 
 
263 
Merge table logging: 
Venta Pro can now be setup to log when a table is merged, this information will 
be logged in the c:\vpro\data\log\Current.txt file. 
 
 
262 
EFTOcius2: the gratuity value from the pinpad was overwriting any gratuity 
entered through overtender. Now is fixed. 
 
 
04/04/11 
Venta Pro V3.1.1008 VPM V1.2.200 
 
 
261 
Feature Added 
It is now possible to force the server to close any open tables at close session, 
previously the closing of open tables at close session was not compulsory. Add 
the following setting to the S2001.ini file on each terminal 
FORCETABLECLOSE=1 
 
 
260 
Old closed transactions pre 23-12-10 (3.1.988 and earlier) wouldn't open tran 
history files. Now fixed. 
 
 
07/03/11 
Venta Pro V3.1.1004 VPM V1.2.200 
 
 
259 
Feature Added 
When using Ocius bill manager 
– it is now possible to enter the table number on 
the eft terminal at the ‘Enter POS reference screen’ 
 
 
258 
On UP-X500 the Active Table display shows previous page before being 
refreshed to first.This means alternative is to show nothing until first page is 
prepared: do this with 
ACTIVETABHOLD=1 
 
 
257 
When changing a sub/condiment item by selecting this item from the display - on 
2nd selection the wrong list could be displayed.now fixed 
 
 
256 
N-Splits in training mode where not working, now fixed 
 
 
255 
When using PROMOCALCBYITEM it is now not possible to split the transaction 
after a subtotal promo, the subtotal promo can be applied after the split. 
 
 
254 
When performing splits the free text was lost. Now fixed 
 
 
253 
Occasionally an Ocius completion was not being registered by SharpPOS. Now 
fixed 
 
 
252 
When using the PROMOCALCBYITEM setting - in NSplit the line discount wasn't 
being split. Now fixed 
 
 
251 
It is no longer possible to use F39 (refunds) to perform refunds for mix and match 
transactions due to the increasing complexity of the calculations, F81 
Transaction Reverse should now be used. 
 
 
02/02/11 
Venta Pro V3.1.994 VPM V1.2.199 
 
 
250 
When paying using a deposit and the deposit was set to overtender but not 
change. The message Overtender not allowed was displayed and the deposit 
was then locked to till 1. Now fixed. The overtender message still shows but the 
deposit is not locked out. 
 
 
26/01/11 
Venta Pro V3.1.993 VPM V1.2.199 
 
 
249 
Standard Hotel Interface - $ITEM line had been incorrect from introduction of V5 
in 12-02-2002 until 29-04-2010. For compatibility a new setting can be used 
HOTELSTDV5_OLD=1 
 
 
248 
When using a training server and splitting bills only the main table could be 
cashed off, now all splits can be cashed off. 
 
 
247 
YesPay and refunds - the payment amount in payment record after completion 
was not being made negative (payment.amnt); Cashrsp reported positive 
payments (Reverse tran was OK) 
 
 
246 
Applying subtotal discounts didn't examine discountability of item discounts. 
They now do, but will only apply to item discounts whose parent product are also 
Correspondingly discountable. 
 
 
245 
Spurious discount by line values appearing in CashRsp. Now fixed 
 
 
244 
Changes made to cash drawer switch detection for UP-5500 
 
 
243 
Problem with discount calculations now fixed. 
 
 
242 
Active Tables were sometimes slow updating table status. 
fixed 
 
 
17/11/10 
Venta Pro V3.1.979 VPM V1.2.199 
 
241 
Feature Added 
Allow big change/payment screen for payment method Cheque.
 
 
 
240 
Feature Added 
Previously when listing the outstanding credit card transactions on the Chip and 
Pi
n terminal within the ‘Get Bill’ list, the transactions where displayed as ‘Tab’ 
(table) number or ‘Srv’ (Server) number. 
It is now possible to display the outstanding credit card transaction using the 
following combination of the till number and appended to this the last 3 digits of 
the transaction number, e.g. on till 4 it could be 4012 
 
 
239 
Feature Added 
Currently when applying discounts any subtotal discount applied are always 
applied to the new sales amount which may have included other discounts, three 
new settings relating to whether subsequent discounts in a transaction are 
applied to other promos or not, have now been added. 
 
 
238 
Feature Added 
When using Mix and Match with ‘Apply promotion’ set as the action, the offer 
may depend on the order of item entry, i.e. discount applied to 
items at point where last bucket was triggered. Using the new setting below the 
trigger will always be the dearest items matching bucket, rather than the first 
items. This feature is not enabled by default and must be activated by adding the 
following setting to the c:\vpro\data\till001\s2001.ini file 
 
MMPromoPlus=1 
 
 
237 
Set base directory C:\Vapp as default! So command line /bC:\Vapp not required 
 
 
236 
Micros - prevent non-numeric or oversized fields: 
Note money fields were filled with * before if too big - now it's '0' 
Numeric fields are replaced by 0; text fields truncated. 
 
 
235 
After OKing a zero total after subtotal, 'create pr-load error' could occur. 
Now fixed 
 
 
234 
When a tran with 0 total is subtotalled and closed, its sales session values were 
not being updated. Fixed 
 
 
233 
Setting covers in Flooredit program wasn't updating when covers entered in 
Venta. Now showing in Floor View 
 
 
232 
Deposit could be used twice for payment within one transaction (leading to error 
604 but the transaction was finalised). Now fixed. 
 
 
231 
Big payment change screen - sometimes exits immediately. 
Possibly caused by mechanical microswitch bounce. Software now double 
checks. 
 
 
230 
Error correct on first item in table tran didn't correctly reopen a new transaction 
 
 
13/08/10 
Venta Pro V3.1.938 VPM V1.2.198 
 
 
 
229 
Feature Added  
Commidea 
– Ocius Bill Manager 
 
 
228 
Feature Added  
Commidea - Ocius direct connection  
 
 
227 
Feature Added 
Commidea Ocius II has a new option to choose tran no. as source for the bill ref 
 
 
226 
Feature Added  
Printing PLU/EAN on receipt 
 
 
225 
Feature Added  
Print to Kitchen Printer via table only 
 
 
224 
Feature Added 
New settings relating to whether subsequent discounts in a transaction are 
applied to other promos or not have been added 
 
There is a setting in VPM 
– Configure – System Configuration – More – Legacy 
Mode, this defaults to enabled and will work as it does now. 
With this setting unchecked then a combination of the 2 settings within 
promotions can be used 
 
Apply to other promos (this allows this promotion to be able to be applied to other 
Page of 21
Display

Download Sharp VENTA PRO V3 (serv.man191) Driver / Update

Here you can read online and download Sharp VENTA PRO V3 (serv.man191) Driver / Update in PDF. VENTA PRO V3 (serv.man191) driver / update will guide through the process and help you recover, restore, fix, disassemble and repair Sharp VENTA PRO V3 (serv.man191) EPOS. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.