Read Sharp UP-X500 (serv.man5) Service Manual online
UP-X500I
Removing the MCR unit
– 2 –
3-3. Removing the LCD cabinet
1.
Remove the screw
1
.
2.
Use a screwdriver to catch the notched section and disassemble
the MCR rear cabinet
the MCR rear cabinet
2
.
Caution: • Wrap the screwdriver with waste cloth when using it without
scratching the cabinet.
• Rotate it in the direction of A and slide it in the direction of B,
and it will come off easily.
3.
Remove two screws
3
, and disassemble the LCD rear cabinet
4
from the MCR side.
4.
Remove screw
5
, and disassemble the Clamp
6
.
3-4. Removing the LCD unit
1.
Remove six screws
1
, and remove the touch panel
2
, the inserter
cable
3
, and the LED cable
4
, and disassemble the LCD assembly.
2.
Remove four screws
5
, and disassemble the LCD unit
7
from the
LCD plate
6
.
Caution: Tighten the screw
1
at 3.5kg.
3-5. Removing the touch panel
Remove the T/P angle A
2
, T/P angle B
3
, with screws
1
.
And disassemble the Touch panel
2
.
4. Removing the MCR unit
1. Remove the MCR rear cabinet (Reference [3-3]).
2.
Remove the screw
1
, and remove the MCR cable
2
and disassemble
the MCR
3
.
1
B
A
2
3
3
4
5
6
Cloth
1
1
1
1
1
1
2
3
4
5
5
5
5
6
7
1
1
1
1
1
1
1
1
2
2
3
3
4
1
2
3
Click on the first or last page to see other UP-X500 (serv.man5) service manuals if exist.