Read Sharp UP-X200 (serv.man16) Driver / Update online
10
If not already updated please do so at this timing:
UP-X200 OS version 1.23
UP-X300 OS version 1.07
UP-X200 OS version 1.23
UP-X300 OS version 1.07
The following items 1 to 4 are resolved problems
1. Scale compulsory item can be registered at the terminal which isn't connected scale.
Note: It is modified in such a way that compulsory scale items cannot be registered at
terminals to which a scale is not connected.
2. KP programming by room doesn't work at UP-X200.
3. At clerk report the closed check amount is not correct.
4. At PMS file base file name and file format of POST file are mofified.
1. Scale compulsory item can be registered at the terminal which isn't connected scale.
Note: It is modified in such a way that compulsory scale items cannot be registered at
terminals to which a scale is not connected.
2. KP programming by room doesn't work at UP-X200.
3. At clerk report the closed check amount is not correct.
4. At PMS file base file name and file format of POST file are mofified.
X300
V1.5.0.6
X200
V1.1.0.4
V1.5.0.6
X200
V1.1.0.4
[Compatibility]
The data is compatible with 1.5.0.4 previous version.
The data is not compatable with any 1.4.x.x versions.
Please refer to instructions of 1.5.0.4 below regarding data convert
At customer bill delete the RA amount was reversed and added to the total charge amount.
If at the “POS device programming” for Kitchen printers “KP recapitulation: YES” was selected and the same Link PLU is registered multiple
times the Qty. of tied PLU for KP printing was previously not correct.
When Kitchen printer was re-directed by printer re-direct selection to a Report printer the UP-X200 terminal exited to Windows CE screen.
When Terminal 1 KP is set to "Disable" and Terminal 2 KP is set to “Enable”.
Open a GLU at Terminal 1 and register an item the item is not printed, OK,however if the same GLU is opened at Terminal 2 and register an
another KP item, the item entered at Terminal 1 is printed.
The data is not compatable with any 1.4.x.x versions.
Please refer to instructions of 1.5.0.4 below regarding data convert
At customer bill delete the RA amount was reversed and added to the total charge amount.
If at the “POS device programming” for Kitchen printers “KP recapitulation: YES” was selected and the same Link PLU is registered multiple
times the Qty. of tied PLU for KP printing was previously not correct.
When Kitchen printer was re-directed by printer re-direct selection to a Report printer the UP-X200 terminal exited to Windows CE screen.
When Terminal 1 KP is set to "Disable" and Terminal 2 KP is set to “Enable”.
Open a GLU at Terminal 1 and register an item the item is not printed, OK,however if the same GLU is opened at Terminal 2 and register an
another KP item, the item entered at Terminal 1 is printed.
X300
V1.5.0.4
X200
V1.1.0.4
V1.5.0.4
X200
V1.1.0.4
[Compatibility]
The data is not compatible with any previous version.
Please make a CSV backup of your previous data. Convert the CSV data by the “CSV convert tool” on a PC and then “Restore”
the new CSV file to your terminal or system. (Please refer to separate documentation see EPOS TECH WEB)
Please make a CSV backup of your previous data. Convert the CSV data by the “CSV convert tool” on a PC and then “Restore”
the new CSV file to your terminal or system. (Please refer to separate documentation see EPOS TECH WEB)
Do not install the new Version with “keep current data” or copy and paste CDB file from any older version.
Click on the first or last page to see other UP-X200 (serv.man16) service manuals if exist.