Read Sharp UP-V5500 (serv.man6) Service Manual online
CONNECTING PERIPHERAL
1.
Keyboard and mouse connection
There are 4 USB ports in the left side IO port.
Only USB type of keyboard and mouse can be connected.
2. Printer connection
The serial type, the parallel type, and the USB type of
printers for receipt can be connected. Serial port is
located in the backside IO port, and parallel port is
located in the left side IO port.
<
Mouse>
<
Receipt Printer>
<
Keyboard>
3. Barcode scanner connection
Connect to the serial ports. ( Barcode scanner, Serial interface
devices etc.)
4. Cash Drawer connection
When a VCT Cash Drawer is used, connect it to the CBX port
at the side I/O port on this system. The connection for Sharp
drawer units is realized at the marked rear I/O ports.
<
Hand Scanner>
<
Cash Drawer>
5. Peripheral devices for the Sound
6. RJ-45 LAN cable connection
Your system has an RJ-45 LAN connector with the
connection and activity status LED on the front of the
system. You can connect the RJ-45 cable from the RJ-
45 connector on the system to both 10Base-T and
100Base-TX.
connection and activity status LED on the front of the
system. You can connect the RJ-45 cable from the RJ-
45 connector on the system to both 10Base-T and
100Base-TX.
connection
External amplified speaker or H/P can be connected.
<
Headphone> <Speaker>
<
LAN Hub>
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
12 of 77
Click on the first or last page to see other UP-V5500 (serv.man6) service manuals if exist.