Read Sharp UP-5300 (serv.man6) FAQ online
The following slides are based on
The following slides are based on
actual telephone calls or other types
actual telephone calls or other types
of queries we have received from
of queries we have received from
ECR/EPoS support staff.
ECR/EPoS support staff.
I am getting the
following error when
the 5700 / 5300 starts
up.
following error when
the 5700 / 5300 starts
up.
“Cannot Show screen
error 2023”
error 2023”
The following setting is
wrong in GO.BAT
wrong in GO.BAT
for flash ram
“Set TBDIR=d:\ex”
for hdd
“Set TBDIR=c:\ex”
I am getting the following
error when the 5700 / 5300
starts up.
error when the 5700 / 5300
starts up.
“Anet init failed -9 fatel error
exit code -10”
exit code -10”
Change the positions of S1
and S2 on the Riser card .
and S2 on the Riser card .
5700 - S1 and S2 should be
set to 1
set to 1
5300 - S1 and S2 should be
set to 3
set to 3
Also
Check the Network card is
set for
set for
IRQ 10 and I/O 240 as
shown below.
shown below.
I/O 240H
IRQ 10
JPR
BROM ADDRESS
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I am getting the following
error when the 5700 / 5300
starts up.
error when the 5700 / 5300
starts up.
“Preset_Load failed 1”
There is a corrupt or
missing Preset1.dat
file.
missing Preset1.dat
file.
To rectify this go into
FM and then into
PRESET PLU’S then
choose end this will
then recreate the file
in c:\usr\data. Then
restart the Pos
FM and then into
PRESET PLU’S then
choose end this will
then recreate the file
in c:\usr\data. Then
restart the Pos
