Read Sharp UP-3515 (serv.man4) Service Manual online
UP-3500 (V) DISASSEMBLY AND ASSEMBLY
– 11 –
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
1. CPU PWB disassembly
1) Remove the two screws. Disengage the four pawls and remove the
rear cover unit.
Clamping: 5.0±0.2kgf.cm
Clamping: 5.0±0.2kgf.cm
2) Remove the six screws. Disengage the five pawls, and open the
front cabinet unit.
Clamping: 10.0±0.2kgf.cm
Clamping: 10.0±0.2kgf.cm
3) Disconnect the four connectors, and remove the front cabinet unit.
Note for installation
Insert the connectors and pass the cables in the following sequences:
1, 2, and 3 as shown in the illustration below.
Insert the connectors and pass the cables in the following sequences:
1, 2, and 3 as shown in the illustration below.
DC jack
When removing the DC plug
from the DC jack, be sure to
release the lock and use a
great care not to touch the
peripheral ribs with your
fingers.
from the DC jack, be sure to
release the lock and use a
great care not to touch the
peripheral ribs with your
fingers.
3DVV&DEOHWKLQ
RYHU&DEOHPHGLXP
DQGFRQQHFWLWZLWK
&21
RYHU&DEOHPHGLXP
DQGFRQQHFWLWZLWK
&21
&RQQHFW&DEOH
WKLFNZLWK&1
&RQQHFW&DEOH
PHGLXPZLWK&1
PHGLXPZLWK&1
%HFDUHIXOZLWKWKHFDEOHVQRWWREHFXWEHFDXVHWKHFDEOHV
DUHVKRUW
DUHVKRUW
Click on the first or last page to see other UP-3515 (serv.man4) service manuals if exist.