Read Sharp UP-3515 (serv.man3) Service Manual online
3 – 44
11. [SUPERVISOR]
Note:All modes can be accessed without cleak assignment when super-
riser mode is “on”.
riser mode is “on”.
12. [MEMORY INITIALIZE]
All of counter, totalizer and preset memory are initialized.
Except gt memory
13. [SSP]
The contents of item are shown in the table below.
14. [BACKUP SEND]
The contents of item are shown in the table below.
* “PROGRAMMED” means “SPEED is specified by SRV#903-A”.
15. [BACKUP RECEIVE]
The contents of item are shown in the table below.
*“PROGRAMMED” means “SPEED is specified by SRV#903-A”.
PRINT at the end of the job
The message is printed on JOURNAL only.
*All ERROR MESSAGE are fixed.
*ERROR CODE:
01 = ID No. error (ID NO. in IDENQ is not correct.)
02 = Parity error
02 = Parity error
03 = Check sum error
04 = Data size error
05 = hardware error
05 = hardware error
06 = Power off error
07 = Time out error
11 = Transmit data size error
11 = Transmit data size error
12 = Block sequence error (Irregular sequence No. has been received.)
13 = NAK code error (NAK code has been received.)
15 = ECR TYPE error (Models of two ECR is different.)
15 = ECR TYPE error (Models of two ECR is different.)
DISPLAY TEXT
SELECT ITEM
MRS
NOTE
SUPERVIS.
MODE
OFF
OFF
ON
CONTENTS
MEMORY INITIALIZE
DISPLAY TEXT
CONTENTS
SSP INPUT
SSP No. ENTRY
SSP EDIT
SSP No. ENTRY
SSP ALL CLEAR
YES/NO
SSP IND.CLEAR
SSP No.
SSP REACTIVE
SSP REACTIVE
DISPLAY
SELECT ITEM
SEND DATA
ALL RAM SSP
SSP
SPEED
PROGRAMMED
115,200bps
57,600bps
38,400 bps
19,200 bps
9,600 bps
4,800 bps
2,400 bps
DISPLAY
SELECT ITEM
SPEED
PROGRAMMED
115,200dps
57,600dps
38,400 bps
19,200 bps
9,600 bps
4,800 bps
2,400 bps
Print
NOTE
(HEADER)
BACKUP SEND
SEND OK
JOB TITLE is printed.
MESSAGE is printed. (This is Normal
End Message.)
End Message.)
(HEADER)
BACKUP RECEIVE
RECEIVE OK
JOB TITLE is printed.
MESSAGE is printed. (This is Normal
End Message.)
End Message.)
COM.ERROR XX
ERROR MESSAGE, ERROR CODE
DATA ERROR XX
ERROR MESSAGE, ERROR CODE
COM.TIME-OUT
ERROR MESSAGE
Click on the first or last page to see other UP-3515 (serv.man3) service manuals if exist.