Read Sharp UP-3515 (serv.man11) Driver / Update online
UP-3500/3515
Manual – V1.6x
New functions
Doc: up35xx_pm_e_1v67
Page 14 / 41
Parts & Technical Services
15.
Screen limitation [V1.65]
For each Clerk a screen limitation can be set in order to disable the access to certain screens. This is
current specification. But in case no clerk is signed on, every screen can be displayed without any
limitation.
To make it possible, to have a screen which can be shown only to signed-on clerks a new SRV
parameter (SRV #992D) has been introduced. If this SRV parameter is set the screen# 30 can only
be opened if a clerk is signed on and has no limitation.
If the clerk is signed on, the above mentioned screen limitation setting becomes valid.
current specification. But in case no clerk is signed on, every screen can be displayed without any
limitation.
To make it possible, to have a screen which can be shown only to signed-on clerks a new SRV
parameter (SRV #992D) has been introduced. If this SRV parameter is set the screen# 30 can only
be opened if a clerk is signed on and has no limitation.
If the clerk is signed on, the above mentioned screen limitation setting becomes valid.
Contactless Clerk Key for
Employee Time In/Out
Display screen #30 only if
a clerk is signed on.
#992-C
Default
No
No
0
√
Yes
1
No
2
Yes
3
Yes
No
4
Yes
5
No
6
Yes
7
16.
Customer charge limit [V1.65]
Currently the Customer charge limit will be validated by every single item registration. Even if the
Customer wants to pay by Cash, it can happen that the registration is not possible because it
exceeds the set Customer limit.
If the already existing SRV parameter #986A is set to -4 (Customer code entry finalized by -> Any
Payment) the Customer limit will be validated only at the end of the transaction by using CHARGE.
Customer wants to pay by Cash, it can happen that the registration is not possible because it
exceeds the set Customer limit.
If the already existing SRV parameter #986A is set to -4 (Customer code entry finalized by -> Any
Payment) the Customer limit will be validated only at the end of the transaction by using CHARGE.
17.
Sending of registration data to the Ethernet network [V1.67]
In order to use a PC as e.g. a customer display or as a video surveillance system (with corresponding
software) it is possible to send out registration data over the Ethernet network. During a
registration, every single item registration will be send. After finalizing the registration, the total
amount as well as the clerk name and number will be sent additionally.
To activate this feature the new Service parameter #997 has to be set accordingly. With this
parameter the last octet of the IP address of the Server PC as well as the port the Server PC is
listening to must be defined.
software) it is possible to send out registration data over the Ethernet network. During a
registration, every single item registration will be send. After finalizing the registration, the total
amount as well as the clerk name and number will be sent additionally.
To activate this feature the new Service parameter #997 has to be set accordingly. With this
parameter the last octet of the IP address of the Server PC as well as the port the Server PC is
listening to must be defined.
Listening Port of Server PC
Port &HFEED + X
Last octet of IP address of Server PC
#997
Default
0
000
0000
Prior to set the corresponding SRV parameter, a proper working Inline System has to be setup. Also
the MWS at \6 PGM2 MODE\2 SETTING\23 MWS CONFIG\[IP ADDRESS1-4] must set to the same
network. After setting this SRV parameter #997 a Service Reset is necessary.
For transmitting the data, the UDP protocol will be used, means the ECR does not expect any
answer from the Server PC.
Click on the first or last page to see other UP-3515 (serv.man11) service manuals if exist.