Read Sharp UP-3500 (serv.man62) Driver / Update online
UP-3500
ROM Version history
Version
No.
Feature description or improvement:
Added functionality or countermeasure:
V1.11
Compatibly:
Complete data compatibility exist between the new ROM version V1.11
and the previous ROM version V1.10
Complete data compatibility exist between the new ROM version V1.11
and the previous ROM version V1.10
1.
Implemented SSP‘s
Following SSP programs issued for ROM version 1.01 / 1.10 are now
implemented:
SSP 001 applicable for V1.01 / corrected in V1.10
- Enable “BS RETURN” key operation after the C.BILL printout
SSP 003 applicable for V1.01
SSP 004 applicable for V1.10
- Incorrect PLU Sales Report with Final / Promotion
SSP 005 applicable for V1.01 / corrected in V1.10
- Terminal lock-up when using voiding Half Pint
SSP 006 applicable for V1.01
SSP 007 applicable for V1.10
- There are cases that Ethernet printer doesn´t print for example:
Slip paper is not inserted in TMH6000R after Bill print key operation
SSP002 (Not Released)
implemented:
SSP 001 applicable for V1.01 / corrected in V1.10
- Enable “BS RETURN” key operation after the C.BILL printout
SSP 003 applicable for V1.01
SSP 004 applicable for V1.10
- Incorrect PLU Sales Report with Final / Promotion
SSP 005 applicable for V1.01 / corrected in V1.10
- Terminal lock-up when using voiding Half Pint
SSP 006 applicable for V1.01
SSP 007 applicable for V1.10
- There are cases that Ethernet printer doesn´t print for example:
Slip paper is not inserted in TMH6000R after Bill print key operation
SSP002 (Not Released)
V1.10
Compatibly:
The following data compatibility exist between the new ROM version
V1.10 and the previous ROM version V1.01:
The following data compatibility exist between the new ROM version
V1.10 and the previous ROM version V1.01:
1.
All RAM data is not compatible.
2.
All Program data is not compatible
3.
Sales Data is compatible between the 2 versions
4.
Individual Programming data is compatible, except of the
Function text and Function key text.
Caution:
Caution:
a)
Please only download individual programming data from the
V1.01 to a machine with the version ROM V1.10.
Do not download the data described at above 1./2./4.
Do not download the data described at above 1./2./4.
1. Orderman connection
In addition to the functionality provided on the UP800 other
improvements include: selectable of Void ST% at the Orderman side
or ECR side.
Also Bar printing from selected terminals (print from OrderMan non
print from ECR new SRV setting 903-D)
improvements include: selectable of Void ST% at the Orderman side
or ECR side.
Also Bar printing from selected terminals (print from OrderMan non
print from ECR new SRV setting 903-D)
UP-3500
ROM Version history
Version
No.
Feature description or improvement:
Added functionality or countermeasure:
3. PLU Key Top Text entry viewed in PGM.
This new feature allows the programmer to visualise the text size as it
would appear on the user screen, whilst the programmer is still in
PGM Mode, sample key images are displayed just above the onscreen
keyboard, allowing the programmer to select the best appearance for
the operator.
would appear on the user screen, whilst the programmer is still in
PGM Mode, sample key images are displayed just above the onscreen
keyboard, allowing the programmer to select the best appearance for
the operator.
4.
Special character entry screen
The country related special characters are sorted to each other and
are not any longer mixed up.
5. Bill separation
At bill separation it is now possible to split “1” item.
(Example : To split one bottle of Wine between several persons)
(Example : To split one bottle of Wine between several persons)
6. Trans Out / Trans In table function
At “Trans In” operation a new pop-up window comes up and allows
UP-3500
ROM Version history
Version
No.
Feature description or improvement:
Added functionality or countermeasure:
selecting if a selected table or all tables of a particular Clerk (Original
Clerk#) should be “Transferred In”.
Clerk#) should be “Transferred In”.
7. Auto GLU generate
A separate GLU range for auto generated GLU codes can be set.
The N.C. key automatically generates sequentially the next highest
GLU number.
The N.C. key automatically generates sequentially the next highest
GLU number.
8. Name & Address function
An individual “Name & Address” record can be manually deleted from
the “Name & Address” list.
the “Name & Address” list.
9. Name & Address file warning message
At creation of a new name & address the remaining number of records
in the Address book file is now checked. If it has less than 10 records
the warning message “ADDRESS BOOK NEARLY FULL” comes up.
If a newly created name & address cannot be stored in the Address
book file the warning message “ADDRESS BOOK FULL” comes up.
In a network system this messages are only shown at the Master.
in the Address book file is now checked. If it has less than 10 records
the warning message “ADDRESS BOOK NEARLY FULL” comes up.
If a newly created name & address cannot be stored in the Address
book file the warning message “ADDRESS BOOK FULL” comes up.
In a network system this messages are only shown at the Master.
10. Training function
It is now possible to select if at training mode “Journal print / EJ and
TLOG recording should be done.
The recording depends on the journal printer setting and/or on the
existence of EJ / TLOG files.
Under SRV#986-D following new selection (+1) can be done:
“Journal print / EJ- / TLOG recording in training mode Yes / No”
TLOG recording should be done.
The recording depends on the journal printer setting and/or on the
existence of EJ / TLOG files.
Under SRV#986-D following new selection (+1) can be done:
“Journal print / EJ- / TLOG recording in training mode Yes / No”
11. Employee Transaction file
Under SRV#987-C following new selection can be done:
“Time-Out operation without clerk resetting Enable / Disable
If the Employee Transaction file exists and “Time-Out” operation is
done the new error message of “CLERK-Z REPORT NOT DONE YET”
comes up in order to assure that the all clerk turnover data are stored
in the employee transaction file.
“Time-Out operation without clerk resetting Enable / Disable
If the Employee Transaction file exists and “Time-Out” operation is
done the new error message of “CLERK-Z REPORT NOT DONE YET”
comes up in order to assure that the all clerk turnover data are stored
in the employee transaction file.
12. Employee <-> Clerk assignment release
Previously the assignment of a employee code to a clerk operator was
released after the “All Clerk-Z” report.
Now the release can also be done after “Individual Clerk-Z” report.
released after the “All Clerk-Z” report.
Now the release can also be done after “Individual Clerk-Z” report.
UP-3500
ROM Version history
Version
No.
Feature description or improvement:
Added functionality or countermeasure:
13. Working Shift entry pop-up window
After “WORKING TIME SHIFT” operation now only the remaining shifts
of the working day are displayed.
Previously all available “Working Time Shift’s” were shown.
of the working day are displayed.
Previously all available “Working Time Shift’s” were shown.
14. CCD function
Already entered CCD data are shown in the CCD entry window after
an entry was done and it has been cancelled or at the CCD entry
operation “Overwrite / Add / CORRECTION”.
operation “Overwrite / Add / CORRECTION”.
15. Open receipt and online communication
Online General-Z report commands will be executed even so there are
still “Open receipts”
The “Open receipts” total amounts are stored at the CREDIT 9
totalizer of the General report in such cases.
still “Open receipts”
The “Open receipts” total amounts are stored at the CREDIT 9
totalizer of the General report in such cases.
16.
Orderman connection and KP print
At SRV#903-D it is now possible to set one KP number (1 to 9) in
order to realise a so called “Bar machine not KP print” function.
At the terminal which has at SRV#903-D a KP number set, the item
registrations which belong to preset KP number are not printed.
Items booked on the Orderman or at other terminals (SRV#903-D=0)
are printed as usual at the Kitchen printer.
Setting the SRV#903-D to “0” at a terminal means that previous
Kitchen printing specification is valid.
17. [+] key repeat entry function
It is possible to entered manually a quantity (max. 4 digits) before the
[+] key operation for repeat entries.
[+] key operation for repeat entries.
18. ROOM GLU function
1.
Room header information (Date/Time/Clerk name/machine name)
will be automatically erased at the following conditions:
a)
In case a room is opened and closed w/o any item entry
