Read Sharp UP-3500 (serv.man47) Driver / Update online
Page 12 14
>>> Changes / Improvements / Corrections <<<
9.
SystemXReports can not be taken in case of TerminalCCD.
Even the General Z report has been carried out at every machine in an Inline System, the System X
reports is not possible, if Terminal2CCD is active. This has been corrected.
reports is not possible, if Terminal2CCD is active. This has been corrected.
10.
Lost of Name&Address by making a normal registration to a GLU registration.
In case a normal registration will be transferred to a GLU registration, an already assigned
Name&Address to this GLU will be lost. With this version, the assigned Name&Address is still
assigned to the GLU.
Name&Address to this GLU will be lost. With this version, the assigned Name&Address is still
assigned to the GLU.
11.
Reset of GLU key colour by Memory Initialize.
The colour of the GLU key has not been set to the programmed “GLU KEY COL DEF” in case of
Memory Initialize, but to “Black and White” colour. This has been corrected. Now the colour will
be set according to the programming.
Memory Initialize, but to “Black and White” colour. This has been corrected. Now the colour will
be set according to the programming.
12.
Pint Text after PLU range programming.
For the PLU Pint Text, a text with more than 3 characters has been programmed. After the PLU
range programming, were for “OPERATION” was set to “MAINTENANCE”, the Pint Text is garbled.
This has been corrected.
range programming, were for “OPERATION” was set to “MAINTENANCE”, the Pint Text is garbled.
This has been corrected.
13.
Orderman with TAX system.
The system is set up for the TAX system by setting SRV parameter #901B to 0. In case of the
Orderman is requesting the Subtotal by pressing on “Subtot”, only the Net amount, without the
TAX amount, is displayed. Also in case of finalizing the transaction by a press on “Bill”, only the
Net amount was displayed. With this version, by carrying out the above mentioned functions, the
transaction amount including the TAX amount will be shown at the Orderman.
Orderman is requesting the Subtotal by pressing on “Subtot”, only the Net amount, without the
TAX amount, is displayed. Also in case of finalizing the transaction by a press on “Bill”, only the
Net amount was displayed. With this version, by carrying out the above mentioned functions, the
transaction amount including the TAX amount will be shown at the Orderman.
14.
Orderman and small tender amount at the ECR.
Overlapped clerk is activated. While the ECR shows small tender amount, the Orderman send a
registration. Because of the ECR is not “free” the Orderman receive an error and will disregard the
registration. With this new ROM version, the Orderman will receive a busy. Now the registration
will not be disregarded but the Orderman tries to synchronize after a certain time again.
registration. Because of the ECR is not “free” the Orderman receive an error and will disregard the
registration. With this new ROM version, the Orderman will receive a busy. Now the registration
will not be disregarded but the Orderman tries to synchronize after a certain time again.
15.
KP Hold&Go with tender amount.
If a transaction is finalized with tender amount, but there are still some not printed articles, they are
not printed on the KP, regardless if the transaction is a GLU or a normal –transaction. This is
corrected.
not printed on the KP, regardless if the transaction is a GLU or a normal –transaction. This is
corrected.
16.
Closed Transaction with Bill and Bill number.
Under some circumstances, it could happen that a bill of a recalled Closed Transaction got a new
bill number. With this version the reprinted Bill has the original bill number.
bill number. With this version the reprinted Bill has the original bill number.
17.
Inline system with Backup Master and Master down.
If in an Inline system with activated overlapped clerk function the Master is down, it is not possible
to make a clerk sign on at the Backup Master anymore. In this case it is also not possible to make
the “DECLARE MASTER & STOP DB UPDATE” troubleshooting job code at the Backup Master. This
is corrected. Now, if a clerk tries to make a sign on at the Backup Master while the Master is down,
the message “MASTER DOWN” is displayed. Afterwards the entry of a manager code is required
and the clerk will be signed on. Now the troubleshooting job code can be carried out.
to make a clerk sign on at the Backup Master anymore. In this case it is also not possible to make
the “DECLARE MASTER & STOP DB UPDATE” troubleshooting job code at the Backup Master. This
is corrected. Now, if a clerk tries to make a sign on at the Backup Master while the Master is down,
the message “MASTER DOWN” is displayed. Afterwards the entry of a manager code is required
and the clerk will be signed on. Now the troubleshooting job code can be carried out.
Click on the first or last page to see other UP-3500 (serv.man47) service manuals if exist.