Read Sharp UP-3500 (serv.man44) Driver / Update online
Page 15 - 19
18.
Sequential count, print of consecutive numbers and Journal print/EJ storage.
In order to comply with legal regulations in some countries, the counting and Journal print/EJ
storage of all actions regarding the Training Clerk is realized at the ECR. This depend on the already
existing SRV parameter #986D (+1). If “Journal Print/EJ recording/T"LOG recording in training
mode” is set to YES, the above mentioned becomes valid.
Journal print /EJ storage and sequential count of the consecutive number for all actions are
ensured. Previously not recorded actions are now printed/stored and numbered/counted, i.e. SRV
jobs, PGM jobs, X/Z jobs, registrations a.s.o.
From this version onwards also any “Online communication” is considered as an operation and
follows above rule.
Remark: If SRV #904B = +4, the consecutive number will not be printed at all.
storage of all actions regarding the Training Clerk is realized at the ECR. This depend on the already
existing SRV parameter #986D (+1). If “Journal Print/EJ recording/T"LOG recording in training
mode” is set to YES, the above mentioned becomes valid.
Journal print /EJ storage and sequential count of the consecutive number for all actions are
ensured. Previously not recorded actions are now printed/stored and numbered/counted, i.e. SRV
jobs, PGM jobs, X/Z jobs, registrations a.s.o.
From this version onwards also any “Online communication” is considered as an operation and
follows above rule.
Remark: If SRV #904B = +4, the consecutive number will not be printed at all.
19.
Electronic Journal reading and printing in case of compulsory CCD.
With the new introduced SRV parameter #907D +1 it is selectable if a Electronic Journal
reading/printing is possible even in case compulsory CCD has been set.
reading/printing is possible even in case compulsory CCD has been set.
Z"counter print for
PLU, Hourly, Clerk, Daily
Net, GLU, Cashier
EJ reading and
printing in case of
compulsory CCD
907"D Default
No
0
Yes
1
No
2
No
Yes
3
No
4
√
Yes
5
No
6
Yes
Yes
7
Remark: This setting will overwrite the setting made with SRV #907C (in case of CCD compulsory
(#988"D), X report before CCD entry YES/NO).
Click on the first or last page to see other UP-3500 (serv.man44) service manuals if exist.