Read Sharp UP-3500 (serv.man27) Service Manual online
UP-3500 (V) SRV MODE PROGRAMMING (“7 SD CARD MODE”)
5 – 15
12. ALL RAM DATA (SAVE ONLY / CLEAR & LOAD)
(SRV mode)
The below data is saved or loaded. File is set in the folder for “ALL
RAM BACKUP”.
RAM BACKUP”.
Note:
• If there is the file that has same file name, data is overwritten .
• In case of “LOADING”, the condition of ECR will return to past
condition except Date & Time.
• This file is used only for the purpose of DATA BACKUP at ECR.
Any users do not need to concern its contents.
13. SSP DATA (SAVE ONLY / CLEAR & LOAD) (SRV mode)
All installed SSP data
To activate loaded SSP data, program reset should be done after load-
ing SSP data.
To activate loaded SSP data, program reset should be done after load-
ing SSP data.
14. DISPLAY
The following screen is the top of SD card mode. The mode title is “SRV” or “SD”.
When an error is occurred, the error popup with error message is displayed.
The second line in error popup is the error message. (See error message list)
The second line in error popup is the error message. (See error message list)
While POS accesses a SD card, following popup is displayed.
The triangular letter scrolls from left to right.
The triangular letter scrolls from left to right.
File Name
All RAM data
ALL . SDA
File Name
(*1)
SSP data
SSP .SDA
SSP .FDS
SSP .FDS
C0
Click on the first or last page to see other UP-3500 (serv.man27) service manuals if exist.