Read Sharp UP-3500 (serv.man25) Service Manual online
Page 7 - 39
8.
Happy Hour timing for GLU registrations.
At the former version, Happy Hour status has only been checked at the opening time of a GLU.
The Happy Hour status at that time was valid for all of registration for this GLU. Even at reopen
of the GLU, no further checking of the Happy Hour status was done.
The Happy Hour status at that time was valid for all of registration for this GLU. Even at reopen
of the GLU, no further checking of the Happy Hour status was done.
With this version, at every GLU registration (open a new GLU / reopen a GLU) the Happy Hour
status is checked and granted if active.
status is checked and granted if active.
Happy Hour is set from 10 to 11 o’clock.
10
11
Open GLU
Reopen GLU
Reopen GLU and finalize
HH is not granted
HH is granted
HH is not granted
9.
Setting of Auto-GLU-Number.
By each press of the New Check key (N.C. number 638) the next free GLU number, out of a
given range, will be taken for the GLU registration. This search will be start from the current
used number onwards, anytime. Even, if a GLU from a former registration will be finalized by a
Media key, this again free number will not be used for the next N.C. registration. With this
version, it is possible to set the start number for searching for the next free number by the key
sequence
given range, will be taken for the GLU registration. This search will be start from the current
used number onwards, anytime. Even, if a GLU from a former registration will be finalized by a
Media key, this again free number will not be used for the next N.C. registration. With this
version, it is possible to set the start number for searching for the next free number by the key
sequence
[start number] [.] [N.C]
Please see following example:
Auto Generate GLU range is set from 200 to 250.
GLU 200 to 210 have been opened and finalized with NBAL.
GLU 205 is reopened and finalized with Cash.
By the next press on N.C. the GLU with the number 211 will be opened, but not 205.
With the key sequence 200 [.] [N.C.] the start number for searching is set to 200.
By the next press on N.C. the GLU with the number 205 will be opened.
GLU 200 to 210 have been opened and finalized with NBAL.
GLU 205 is reopened and finalized with Cash.
By the next press on N.C. the GLU with the number 211 will be opened, but not 205.
With the key sequence 200 [.] [N.C.] the start number for searching is set to 200.
By the next press on N.C. the GLU with the number 205 will be opened.
The new start number must be a number out of the Auto Generate GLU range.
In Inline System, the setting of the new start number operation is allowed at Master only.
In Inline System, the setting of the new start number operation is allowed at Master only.
10.
Bill number in T-LOG.
Also the bill number is now stored into T-LOG. However, it is impossible to write the bill number
together with the registration into T-LOG, but since the bill print can be called only directly after
the registration, a second entry with the same CC# of the former registration together with the
generated bill number will be written into T-LOG. As for the identifier for the written item buffer,
the item code 0x00FF is used.
together with the registration into T-LOG, but since the bill print can be called only directly after
the registration, a second entry with the same CC# of the former registration together with the
generated bill number will be written into T-LOG. As for the identifier for the written item buffer,
the item code 0x00FF is used.
Click on the first or last page to see other UP-3500 (serv.man25) service manuals if exist.